Page 55 of 144 FirstFirst ... 5455253545556575865105 ... LastLast
Results 1,351 to 1,375 of 3593

Thread: Retail Q9650 Overclocking Thread

  1. #1351
    Xtreme Mentor
    Join Date
    May 2008
    Posts
    2,554
    Quote Originally Posted by vws View Post
    Folks, don't bother with any core temp readings below 50°C - they are simply not accurate. Quote from this recently released Intel datasheet regarding the thermal sensor issue:



    From my own tests, I found it better be corrected to "60°C" to be closer to reality. Anything below 60°C in my experience doesn't make much sense at all.

    Also here's an article at Tom's HW that's worth reading. It talks about how to set the Tj Max value accurately for your CPU.
    Im pretty sure posting a link to toms is against the forum rules or at least it should be.

    My chip has 3 stuck sensors, my old wolfdale had one as well. Once it gets above that temp it is accurate.

  2. #1352
    Banned
    Join Date
    Nov 2007
    Posts
    1,941
    I have found that to be true.
    After testing yesterday, the temps seem to even out above 50c or so, core1 is still 10c higher on load but it now dosent bother me so much.
    Thanks for the info

  3. #1353
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by Grnfinger View Post
    Late to the game here
    Just pick'd up a Q9650 FPO L828A446

    4.2GHz was a walk in the park, but my concern is the temps.
    3 cores are nice and cool 29c-31c but the 1 core is a staggering 40c, this is water cooled and yes I have checked the mount and reseated twice.
    Anyone else have this issue or am I the lucky winner today?
    I'm in no hurry to lap the the chip for I might sell it if I cant do 500x9
    Hey Grn i have the same batch , my mate Jor3lBR get it for me and also the UD3P great combo !!! still on my way to my country, such a low vid it's hotter than my other 1,25vid, but in the end he told me that the domino was not doing good contact so will see how it goes on my D-TEK block, also some sensors where stuck at first start all stock but after some burn in days they start moving

    Here are some tests he did...

    The Chip


    Firsts stabilty tests on XP64 SP2


    IBT and OCCT tests on XP64 SP2


    Some 10h Blend tests with some more VCore on Windows7


    And the most awaited one needs more work but a very nice start


    ************************************************** ************************************************** ******************************************
    I wanna thank all members of this thread and others for all the great help always and specially to my friend Jor3lBR for his hard work and patience, thanks
    for your pics, screens and all the time you spent on finding a good one and testing it day after day
    You rock mate


    ************************************************** ************************************************** ******************************************
    Last edited by andressergio; 03-01-2009 at 05:58 AM.
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  4. #1354
    Xtreme Addict
    Join Date
    Feb 2008
    Location
    Russia
    Posts
    1,910
    andressergio
    Gold chip, bro Congrats

    Intel Q9650 @500x9MHz/1,3V
    Asus Maximus II Formula @Performance Level=7
    OCZ OCZ2B1200LV4GK 4x2GB @1200MHz/5-5-5-15/1,8V
    OCZ SSD Vertex 3 120Gb
    Seagate RAID0 2x ST1000DM003
    XFX HD7970 3GB @1111MHz
    Thermaltake Xaser VI BWS
    Seasonic Platinum SS-1000XP
    M-Audio Audiophile 192
    LG W2486L
    Liquid Cooling System :
    ThermoChill PA120.3 + Coolgate 4x120
    Swiftech Apogee XT, Swiftech MCW-NBMAX Northbridge
    Watercool HeatKiller GPU-X3 79X0 Ni-Bl + HeatKiller GPU Backplate 79X0
    Laing 12V DDC-1Plus with XSPC Laing DDC Reservoir Top
    3x Scythe S-FLEX "F", 4x Scythe Gentle Typhoon "15", Scythe Kaze Master Ace 5,25''

    Apple MacBook Pro 17` Early 2011:
    CPU: Sandy Bridge Intel Core i7 2720QM
    RAM: Crucial 2x4GB DDR3 1333
    SSD: Samsung 840 Pro 256 GB SSD
    HDD: ADATA Nobility NH13 1GB White
    OS: Mac OS X Mavericks

  5. #1355
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by WaterFlex View Post
    andressergio
    Gold chip, bro Congrats
    Thank you mate I'm anxious waiting the combo

    Cheers
    Sergio
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  6. #1356
    Banned
    Join Date
    Nov 2007
    Posts
    1,941
    Yes you have a sweet chip there for sure, and you have motivated me , I just managed to reduce vcore for 4200, still tweaking but its looking good


  7. #1357
    Xtreme Addict
    Join Date
    Jul 2007
    Location
    Arizona - USA
    Posts
    2,200

    Arrow From USA to Uruguay :-)

    Quote Originally Posted by andressergio View Post
    Hey Grn i have the same batch , my mate Jor3lBR get it for me and also the UD3P great combo !!! still on my way to my country, such a low vid it's hotter than my other 1,25vid, but in the end he told me that the domino was not doing good contact so will see how it goes on my D-TEK block, also some sensors where stuck at first start all stock but after some burn in days they start moving

    Here are some tests he did...

    The Chip



    And the most awaited one needs more work but a very nice start


    ************************************************** ************************************************** ******************************************
    I wanna thank all members of this thread and others for all the great help always and specially to my friend Jor3lBR for his hard work and patience, thanks
    for your pics, screens and all the time you spent on finding a good one and testing it day after day
    You rock mate


    ************************************************** ************************************************** ******************************************

    Hey Sergio,

    I'm glad you're happy I enjoyed buying your system and sending it to Uruguay keeping my promise of making the Q9650@4500Mhz run Prime95.

    I told you there is no better combo then the UD3P+Q9650

    Your system was great to tweak, took me those 3 days as you know we talked most of them during the OC's in MSN.

    Hopefully it will arrive safe next week so you feel the power of 4500MhzQuad!
    Last edited by Jor3lBR; 03-01-2009 at 08:16 AM. Reason: t-y-p-o
    //RETIRED-o00o--°(_)°--o00o-OVERCLOCKER//


  8. #1358
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by Grnfinger View Post
    Yes you have a sweet chip there for sure, and you have motivated me , I just managed to reduce vcore for 4200, still tweaking but its looking good

    That was my intention , so far i sold the MF2 it was holding me back like crazy this UD3P are awesome mobos

    Cheers mate tell me what's your vid ?

    Sergio
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  9. #1359
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by Jor3lBR View Post
    Hey Sergio,

    I'm glad you're happy I enjoyed buying your system and sending it to Uruguay keeping my promise of making the Q9650@4500Mhz run Prime95.

    I told you there is no better combo then the UD3P+Q9650

    Your system was great to tweak, took me those 3 days as you know we talked most of them during the OC's in MSN.

    Hopefully it will arrive safe next week so you feel the power of 4500MhzQuad!
    Thanks my friend of course i'm happy if have no more fingers to cross my hands and feet are crossed to pass customs this next days

    And i forgot to mention that all of this work you done on just 3 days and some couple of hours each...

    Cheers
    Sergio
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  10. #1360
    Banned
    Join Date
    Nov 2007
    Posts
    1,941
    Quote Originally Posted by andressergio View Post
    That was my intention , so far i sold the MF2 it was holding me back like crazy this UD3P are awesome mobos

    Cheers mate tell me what's your vid ?

    Sergio
    Core Temp reports VID as 1.15 so does Real Temp.

    I'm tempted to try out a UD3P, 500FSB is bootable just not 3d stable yet.
    Messing with clock skew now to settle this chip down.

  11. #1361
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by Grnfinger View Post
    Core Temp reports VID as 1.15 so does Real Temp.

    I'm tempted to try out a UD3P, 500FSB is bootable just not 3d stable yet.
    Messing with clock skew now to settle this chip down.
    Yes this UD3P's are much better for sure...you'll get some rock solid clocks there...

    Cheers and good luck
    Sergio
    Last edited by andressergio; 03-01-2009 at 12:27 PM.
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  12. #1362
    Xtreme Member
    Join Date
    Apr 2008
    Location
    Toronto
    Posts
    355

    Q9650 and Striker II Extreme 790i

    Batch# L844B801 SLB8W Pack date 01/29/2009
    VID 1.25 (no stuck sensors)

    4.05mhz Linked and synced with 8GB's of DDR3. This was very difficult to achieve with my S2E, she's a real beeatch with 8GB's of RAM. Have posted and booted in Vista as high as 4.14mhz linked and synced but not prime95 blend stable. Working on lowest possible cpu volts with LLC disabled now. looks like she needs at least 1.42 underload to hold 4.05mhz.

    Last edited by Trigger5521; 03-01-2009 at 03:27 PM.
    ASUS Striker II Extreme 790i Bios 1202 PICS
    Q9650@4.05 (FSB 450hz X4) Linked & synced.
    Patriot Viper PC2000Mhz DDR3 4x2GB 8-8-8-22-1822
    EVGA GTX470 X2 SLI
    OS RAID 0 2X Intel X25-M 80GB 34NM Postville
    Games RAID 0 500GB X2 ES 7200 32MB Enterprise
    Silverstone TJ10 ESA
    Swiftech MCR220 & MCR120 rads
    D-TEK Fusion v2
    Black Freezer NB/SB
    EK's Acetal on Mosfets
    1/2 R3603 Tygon Tubing
    Corsair HX1000w
    SoundBlaster X-FI TITANIUM - PCIE
    Klipsch ProMedia Ultra 5.1
    Dell 3008WFP 30' @ 2560x1600
    Win7 x64 Pro


  13. #1363
    Registered User
    Join Date
    Sep 2008
    Location
    Bay Area, CA
    Posts
    16


    on a UD3R
    Q9650 E0 1.2 VID 445x9 4320mhz 1.344v @ 480*9
    GIGABYTE EP45-UD3R
    Mushkin 2x2gb 1066 DDR2 5-5-5-15 2.1v
    Lapped TRUE w/ 110cfm Panaflo (shrouded)
    Corsair HX620 Modular
    CoolerMaster 690 Case
    EVGA 9800GTX+

  14. #1364
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by mattlyall06 View Post


    on a UD3R
    Nice vid mattlyall06 its a good balance between heat and OC congrats

    Cheers
    Sergio
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  15. #1365
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by Trigger5521 View Post
    Batch# L844B801 SLB8W Pack date 01/29/2009
    VID 1.25 (no stuck sensors)

    4.05mhz Linked and synced with 8GB's of DDR3. This was very difficult to achieve with my S2E, she's a real beeatch with 8GB's of RAM. Have posted and booted in Vista as high as 4.14mhz linked and synced but not prime95 blend stable. Working on lowest possible cpu volts with LLC disabled now. looks like she needs at least 1.42 underload to hold 4.05mhz.

    Why LLC disabled mate ?
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  16. #1366
    Xtreme Member
    Join Date
    Apr 2008
    Location
    Toronto
    Posts
    355
    Quote Originally Posted by andressergio View Post
    Why LLC disabled mate ?
    On the S2E's it over volts to hell, it has also been linked to instability with BSOD's at idle and what not. I have not had any issues but I wanted to have stable settings both ways.

    LLC enabled cpu v1.33 in BIOS
    LLC disabled cpu v1.63 in BIOS

    I think I have a crazy board.
    ASUS Striker II Extreme 790i Bios 1202 PICS
    Q9650@4.05 (FSB 450hz X4) Linked & synced.
    Patriot Viper PC2000Mhz DDR3 4x2GB 8-8-8-22-1822
    EVGA GTX470 X2 SLI
    OS RAID 0 2X Intel X25-M 80GB 34NM Postville
    Games RAID 0 500GB X2 ES 7200 32MB Enterprise
    Silverstone TJ10 ESA
    Swiftech MCR220 & MCR120 rads
    D-TEK Fusion v2
    Black Freezer NB/SB
    EK's Acetal on Mosfets
    1/2 R3603 Tygon Tubing
    Corsair HX1000w
    SoundBlaster X-FI TITANIUM - PCIE
    Klipsch ProMedia Ultra 5.1
    Dell 3008WFP 30' @ 2560x1600
    Win7 x64 Pro


  17. #1367
    Xtreme Enthusiast
    Join Date
    Sep 2008
    Location
    Las Vegas
    Posts
    677
    Nice work there man... GReat chip and nice of Jor3 to help you out and mail it there.

    I'm now wanting a better board after seing you people's results. but I've yet to try and OC my chip with my new Water loop. I'll be doing that tonight, or tomorrow.
    Project HAF 932 Water-Cooled
    __________________

    New OC Validation


    - Q9650 4.0 Ghz For Now -
    - GTZ, Feser 360, D5 Vario, EK Multi-Option -
    - eVGA 750i FTW! -
    - eVGA GTX 480 H20 & GTX 295 -
    - 2x2GB Dominators PC2-8500C5D -
    - WDCaviar Black 640GB AALS x2 (Raid0) -
    - FreeAgent Pro 500GB Ext x2 -
    - Enermax Revolution 85+ 1050w PSU -
    - X-Fi XtremeGamer -
    - CM HAF 932 H20 -
    - Dell U2410 IPS LCD -
    - Logitech G11 & MX-518 /G9 -
    - Sony 24x Optical w/ LightScribe -
    - BOSE Companion 3 -
    - ATH-AD900 Cans & UE Triple.Fi 10 Custom IEM's -
    - Nikon D40 w/18-105mm & 55-200mm VR's -

  18. #1368
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by xguntherc View Post
    Nice work there man... GReat chip and nice of Jor3 to help you out and mail it there.

    I'm now wanting a better board after seing you people's results. but I've yet to try and OC my chip with my new Water loop. I'll be doing that tonight, or tomorrow.
    Thanks xguntherc yes very nice gesture from my friend Jor

    And yes this UD3P's are awesome boards.

    Cheers
    Sergio
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  19. #1369
    Registered User
    Join Date
    Mar 2008
    Location
    France-Arras
    Posts
    73

    There's some new batches for the Q9650: L845B527...
    I can't find informations on it.
    Hope that these new Q9650 will have some better OC than the last Q6600s...
    L844xxxx seems to be nice BTW
    RIG:
    -ASUS Maximus Formula I+Full EK WB/Q6600 G0@9x450+EK Supreme/4x2go G.Skill PI PC 6400/CF HD4850+XSPC Razor/WD Velociraptor 150Go/Samsung F1 1To.
    -CPU Loop: Laing D5/EK Top rev.2/TFC X-Changer 240+2xEnermax Magma/TFC X-Changer 360+6xSilentX
    -MOBO Loop: Laing 18W/Feser X-Changer 360+3xUltra Kaze 2000

  20. #1370
    Xtreme Member
    Join Date
    May 2008
    Posts
    416
    L825B425

    Clocks very good but needs high(est) voltage (around here)


    Intel DP55KG-Core i5-750-Kingston Hyperx DDR3 1800MHz-EVGA 9800GX2SC-High Power HPC 1000 G14C 1000W-HP W2448HC HDMI
    Intel DP55KG-Core i5-750-Kingston Hyperx DDR3 1800MHz-Sparkle 8800GTX-SilverStone ST1000NV 1000W-Samsung T260HD

  21. #1371
    Registered User
    Join Date
    Sep 2008
    Location
    Bay Area, CA
    Posts
    16
    Quote Originally Posted by andressergio View Post
    Why LLC disabled mate ?
    out of curiosity, if you dont mind me asking, what is your opinion when it comes to load line calibration? why have it enabled rather than disabled? i have it enabled and dont seem to have any problems. why are alot of people so reluctant to enable it?
    Q9650 E0 1.2 VID 445x9 4320mhz 1.344v @ 480*9
    GIGABYTE EP45-UD3R
    Mushkin 2x2gb 1066 DDR2 5-5-5-15 2.1v
    Lapped TRUE w/ 110cfm Panaflo (shrouded)
    Corsair HX620 Modular
    CoolerMaster 690 Case
    EVGA 9800GTX+

  22. #1372
    Xtreme Member
    Join Date
    Apr 2008
    Location
    Toronto
    Posts
    355
    Quote Originally Posted by TheGanG View Post
    L825B425

    Clocks very good but needs high(est) voltage (around here)
    how high are u talking?

    Look at mine L844B801, 1.36 BIOS = 1.44 1.42 idle everest and cpu-z.

    ASUS Striker II Extreme 790i Bios 1202 PICS
    Q9650@4.05 (FSB 450hz X4) Linked & synced.
    Patriot Viper PC2000Mhz DDR3 4x2GB 8-8-8-22-1822
    EVGA GTX470 X2 SLI
    OS RAID 0 2X Intel X25-M 80GB 34NM Postville
    Games RAID 0 500GB X2 ES 7200 32MB Enterprise
    Silverstone TJ10 ESA
    Swiftech MCR220 & MCR120 rads
    D-TEK Fusion v2
    Black Freezer NB/SB
    EK's Acetal on Mosfets
    1/2 R3603 Tygon Tubing
    Corsair HX1000w
    SoundBlaster X-FI TITANIUM - PCIE
    Klipsch ProMedia Ultra 5.1
    Dell 3008WFP 30' @ 2560x1600
    Win7 x64 Pro


  23. #1373
    Xtreme Enthusiast
    Join Date
    Dec 2005
    Location
    Philly
    Posts
    508
    Quote Originally Posted by Trigger5521 View Post
    how high are u talking?

    Look at mine L844B801, 1.36 BIOS = 1.44 1.42 idle everest and cpu-z.

    Wow, that's pretty high voltage for 4Ghz. Do you have LLC enabled on that shot? The reason I ask is because I am running 480FSB, 4230Mhz p95 stable with 1.33v set in bios and CPUZ reads very close to that with LLC set to Auto. I have yet to gain anything with LLC enabled on both my P5E3 Premium or P5Q3 Deluxe. Most of the time when I enable it my system won't post. Better stability with it set to Auto, that's just my experience.

    Here's the specs on my Q9650:

    SLB8W
    L844B781
    VID: 1.235v
    Last edited by deachus; 03-03-2009 at 11:29 AM.

    4770K and 3770k
    MVI Gene and MV Gene
    2 kits TeamX 2400Mhz 2x4GB @ 2600Mhz 10-12-12--28-1T
    Asus 670GTX DCII
    Corsair AX1200 ~ Corsair TX850
    (2) OCZ Vertex 4 RAID0 ~
    Samsung BluRay Burner SH-B123L
    800D~EK Supreme HF Nickel~EK Coolstream 360~BP Matte Black Modded MCP655
    BP Mod Top V2~EK Res~Distilled Water~Silvercoils

  24. #1374
    Xtreme Member
    Join Date
    Apr 2008
    Location
    Toronto
    Posts
    355
    Quote Originally Posted by mattlyall06 View Post
    out of curiosity, if you dont mind me asking, what is your opinion when it comes to load line calibration? why have it enabled rather than disabled? i have it enabled and dont seem to have any problems. why are alot of people so reluctant to enable it?

    On the Asus Striker II Extreme Anand article has this to say about LLC. LLC has caused some 790i people to BSOD/reboot at idle.

    "Loadline Calibration - [Enabled, Disabled] Setting Enabled will effectively remove any negative feedback in the CPU supply voltage regulation circuit. This means that there will be little to no difference between the CPU supply voltage at idle and full-load. This does not mean however that there will be no offset seen between the idle voltage and the CPU Voltage VID as selected in BIOS. Disabled follows the Intel specification and allows the CPU supply voltage to droop under load as properly designed. We recommend you leave this Disabled and increase CPU Voltage as needed to satisfy the minimum operating voltage needed under load.

    "
    ASUS Striker II Extreme 790i Bios 1202 PICS
    Q9650@4.05 (FSB 450hz X4) Linked & synced.
    Patriot Viper PC2000Mhz DDR3 4x2GB 8-8-8-22-1822
    EVGA GTX470 X2 SLI
    OS RAID 0 2X Intel X25-M 80GB 34NM Postville
    Games RAID 0 500GB X2 ES 7200 32MB Enterprise
    Silverstone TJ10 ESA
    Swiftech MCR220 & MCR120 rads
    D-TEK Fusion v2
    Black Freezer NB/SB
    EK's Acetal on Mosfets
    1/2 R3603 Tygon Tubing
    Corsair HX1000w
    SoundBlaster X-FI TITANIUM - PCIE
    Klipsch ProMedia Ultra 5.1
    Dell 3008WFP 30' @ 2560x1600
    Win7 x64 Pro


  25. #1375
    Xtreme Member
    Join Date
    Apr 2008
    Location
    Toronto
    Posts
    355
    Quote Originally Posted by deachus View Post
    Wow, that's pretty high voltage for 4Ghz. Do you have LLC enabled on that shot? The reason I ask is because I am running 480FSB, 4230Mhz p95 stable with 1.33v set in bios and CPUZ reads very close to that with LLC set to Auto. I have yet to gain anything with LLC enabled on both my P5E3 Premium or P5Q3 Deluxe. Most of the time when I enable it my system won't post. Better stability with it set to Auto, that's just my experience.
    LLC is disabled in that shot. BIOS is set to 1.36. My board either overvolts like mad or the board is misreporting the voltage. I'm sorta leaning towards misreporting because when I look at the voltage monitor in the bios itself, it takes 3 or 4 setting changes to get it to move. What I do know is if I lower my vcore one notch I'll BSOD Intel Burn test and error our Prime95 blend.
    ASUS Striker II Extreme 790i Bios 1202 PICS
    Q9650@4.05 (FSB 450hz X4) Linked & synced.
    Patriot Viper PC2000Mhz DDR3 4x2GB 8-8-8-22-1822
    EVGA GTX470 X2 SLI
    OS RAID 0 2X Intel X25-M 80GB 34NM Postville
    Games RAID 0 500GB X2 ES 7200 32MB Enterprise
    Silverstone TJ10 ESA
    Swiftech MCR220 & MCR120 rads
    D-TEK Fusion v2
    Black Freezer NB/SB
    EK's Acetal on Mosfets
    1/2 R3603 Tygon Tubing
    Corsair HX1000w
    SoundBlaster X-FI TITANIUM - PCIE
    Klipsch ProMedia Ultra 5.1
    Dell 3008WFP 30' @ 2560x1600
    Win7 x64 Pro


Page 55 of 144 FirstFirst ... 5455253545556575865105 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •