GTX285 various mods.. which may work for GTX260/280/295 also

[Orangeblast]

well Now I'm around 290-300 ohms...still no difference.

Looks like I really need to revisit the bridging.

1/2/3/4/5/11 are bridged right now...

should I do 12 and get rid of 5? From what I was told in this thread, doing 5 or 12 will give the same results....it doesn't matter doing 5 or 12....any results that prove otherwise?

EDIT: Can someone post a picture of their bridging work? I'm also curious to see how the conductive ink was used...

EDIT: Redid my conductive ink...I got rid of 5 and did 12 instead....so now I'm at: 1/2/3/4/11/12 with my resistor at 290 omhs. I'll test when the ink dries.

EDIT: Okay, getting better results now...Got rid of bridge 5 and bridged 12....now using 1/2/3/4/11/12 and I'm getting 1.26 on load...about 1.263 to 1.268 The only thing I can think of is to better the bridge connections...i'm using conductive ink....i'll try an improve the connection with the ink, may later switch over to solder and a tiny lead. I still have yet to see 1.28