Quote Originally Posted by 03hdfatboy View Post
Right now this is about as fast as I can get it stable..
Have you got the PI Blacks or the std G.Skills?

I think you are pumping too many volts to the ram, I would lower your vdimm down to at least manufacturers maximum 2.0 ~ 2.1v & I'm sure you'll find you can run even lower.

Do you need 8GB of ram? why not start with just 4 & see if you can get it stable then work on from there.

I would manually set your performance level back a click or 2 (back to 7 ~ 8) I would also expand the Memset timings tab by clicking on the arrow to the right of the letters "spd" so you can see what timings & PL the other bank are running too.

Depending on your ram I would also slacken the timings off till you get stable, try 5.5.5.18 or 5.6.6.18 tRFC 52 ~ 62 ish.

My 2x2 4GB kits of OCZ ram like the RCOMP, Skews & Fine delay step degree to be played with to get the best out of them but I think you need to find a few more mhz first before you need to worry about these.