Quote Originally Posted by Leeghoofd View Post
Sure mate :

PHP Code:
Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto 
CPU Clock Ratio .......................: 8
CPU Frequency .........................: 4.0GHz (500X8)

Clock Chip Control 

Standard Clock Control

CPU Host Clock Control.................: [Enabled] 
CPU Host Frequency (Mhz) ..............: 500 
PCI Express Frequency (Mhz) ...........: 100 
C.I.A.2 ...............................: [Disabled] 

Advanced Clock Control

CPU Clock Drive........................: 700
PCI Express Clock Drive................: 700
CPU Clock Skew (ps)....................: 100ps 
MCH Clock Skew (ps)....................: 50ps 

DRAM Performance Control

Performance Enhance....................: Turbo
Extreme Memory Profile (X.M.P.)........: Disabled 
(G)MCH Frequency Latch.................: AUTO 
System Memory Multiplier ..............: 3.20B 
Memory Frequency (Mhz) ................: 1600MHz

Standard Timing Control

CAS Latency Time.......................: 8
tRCD ..................................: 8 
tRP'...................................: 8 
tRAS...................................: 24 

Advanced Timing Control

Everything In Advanced Timing Control on auto besides PL at 8

Motherboard Voltage Control

CPU

Load-Line Calibration..................: [Enabled] 
CPU Vcore..............................: 1.33125
CPU Termination........................: 1.24
CPU PLL................................: 1.50
CPU Reference..........................: 0.785 

MCH/ICH

MCH Core...............................: 1.34
Reference..............................: 0.745
MCH/DRAM Ref...........................: 0.860
ICH I/O................................: 1.5
ICH Core...............................: 1.1

DRAM
DRAM Voltage...........................: 1.720
DRAM Termination ......................: 0.860
Channel A Reference....................: 0.860
Channel B Reference ...................: 0.860 
CPU has a FSB wall at 540FSB, rig posts ( till 560FSB) but after the bios, all goes black lol Tried it on the the Asus mobo same story... but not a bad CPU for 100 euro's...
It's official, my e7300 is a dud I just can't get it IBT stable at 4 GHz. I've tried vcore up to 1.45625v but still no success. I'll have to settle with 3.75 GHz.


Quote Originally Posted by fatguy1992 View Post
Could someone please tell me whats wrong with these settings? I'm not looking for it to be stable, but able to run some benchmarks.

Code:
Robust Graphics Booster ...............: Auto 
CPU Clock Ratio .......................: 9.5
CPU Frequency .........................: 4.5GHz (475X9.5)

Clock Chip Control 

Standard Clock Control

CPU Host Clock Control.................: [Enabled] 
CPU Host Frequency (Mhz) ..............: 475 
PCI Express Frequency (Mhz) ...........: 100 
C.I.A.2 ...............................: [Disabled] 

Advanced Clock Control

CPU Clock Drive........................: Default
PCI Express Clock Drive................: Default
CPU Clock Skew (ps)....................: 0ps 
MCH Clock Skew (ps)....................: 0ps 

DRAM Performance Control

Performance Enhance....................: Turbo
Extreme Memory Profile (X.M.P.)........: Disabled 
(G)MCH Frequency Latch.................: 400MHz 
System Memory Multiplier ..............: 2.00D 
Memory Frequency (Mhz) ................: 950MHz

Standard Timing Control

CAS Latency Time.......................: 5 
tRCD ..................................: 5 
tRP'...................................: 5 
tRAS...................................: 15 

Advanced Timing Control

Everything In Advanced Timing Control on auto.  

Motherboard Voltage Control

CPU

Load-Line Calibration..................: [Enabled] 
CPU Vcore..............................: 1.525v
CPU Termination........................: 1.30v
CPU PLL................................: 1.57v
CPU Reference..........................: 0.823 or 0.863 

MCH/ICH

MCH Core...............................: 1.3
Reference..............................: 0.823 or 0.863
MCH/DRAM Ref...........................: 1
ICH I/O................................: 1.5
ICH Core...............................: 1.1 

DRAM
DRAM Voltage...........................: 2.0
DRAM Termination ......................: 1 
Channel A Reference....................: 1
Channel B Reference ...................: 1
I'v never used a dual before, so i'm having trouble getting it work. BTW my BIOS is F4.
Try lower MCH ref with those settings and 1.26 MCH.