Quote Originally Posted by radaja View Post
adpr 02,heres a post that might help you understand what ET6 shows and what to set in bios.http://www.xtremesystems.org/forums/...postcount=1157
Quote Originally Posted by Lsdmeasap View Post
*** Examples Below using 1.3 Vtt ***

(MCH Ref .68% AKA .68 in ET)
For example if you set 1.3 Vtt and .884 MCH Ref, ET would show .68 MCH Ref as .884 would be .68% of Vtt.

(MCH Ref .70% AKA .70 in ET)
Another example if you set 1.3 Vtt and .91 MCH Ref, ET would show .70 MCH Ref as .91 would be .70% of Vtt

(MCH Ref .72% AKA .72 in ET)
Another example if you set 1.3 Vtt and .936 MCH Ref, ET would show .72 MCH Ref as .936 would be .72% of Vtt
I don't think this is correct. Based on what I saw in screenshots here, it would actually be:

1.3Vtt + 0.884 MCHref in BIOS = 0.816 in ET
1.3Vtt + 0.91 MCHref in BIOS = 0.84 in ET
1.3Vtt + 0.936 MCHref in BIOS = 0.864 in ET

1.2 - stock Vtt
x - current Vtt
y - MCH ref shown in ET
z - MCH ref real (the one in BIOS)

z=x*y/1.2

I could be wrong, but that's consistent with the screenshots.