Suction lines by piotres

[Duniek]

Thanks for make all clear . I can't write it better for sure . BTW You move to USA or what ?

looooooong story about this, always you can ask on GG

im not sure if im getting you correctly, i think piotres was commenting on dunieks perfect english, not literally move to the US

I want, but I can't (now)
maybe in future

end off topic
//

oh piotres, nice evaps there lol

[EliTE22]

im not sure if im getting you correctly, i think piotres was commenting on dunieks perfect english, not literally move to the US

Location: POLAND/Cracow USA/Chicago
this is from his info???

[piotres]

I stay in Poland .

I'm just commenting/asking about words which are in "location" under Duniek's avatar.

[piotres]

Hello

I want to show You three suction lines - the latest I've made :

Two suction lines in black sleeve have 100 cm of DN10 flex hose, CPU enclosure which fits all CPUs included last

nehalem cores, 18 mm thick insulation, K probe on each one , captube 0.9mm .

Red suction line is an old suction line which I remake - it's from triple-evap unit which I must diseamble (becasue

I couldn't sell it ;-/) . It was sth like 110 cm long flex hose but I braze suction flex hose again on both sides

so now suction flex hose have 104 cm , insulation is new 18mm with red sleeve (was 13mm with black sleeve), captube

is also new 0.9mm, I've mount also new Kprobe on evaporator .















And the red one :



Old CPU suction line together with GPU line...





I must scrap whole insulation from old suction line , and some cooper I also decide to throw away ...

New captube I use 350cm of 0.9mm but more than 100 cm is not wrapped around suction flex, so owner can cut it

easily if he'll decide that's too long .










Regards
Peter

[bartx]

High quality work as always

[fiveprime]

Too bad you live in poland :p

[teyber]

Too bad you live in poland :p

why? shipping won't be killer to the states

[Jor3lBR]

Too bad you live in poland :p

why? shipping won't be killer to the states

Probably his talking about the full unit like single stages and cascades.

[Jor3lBR]

I stay in Poland .

I'm just commenting/asking about words which are in "location" under Duniek's avatar.

Piotres I offer you a stay in my house until you finish my cascade... So you get free stay, free food, free vacations + cascade check

[sjg0]

Piotres I offer you a stay in my house until you finish my cascade... So you get free stay, free food, free vacations + cascade check

lol mind if I drop by too? It would be a privilege to meat such an amazing fellow.

[Duniek]

nice evaps, lol

[fiveprime]

why? shipping won't be killer to the states

How much it "not killer"?


Yeah, I was going to get an estimate from him but then I realized he lived in poland, it would be a pain getting a full unit shipped.

[teyber]

sorry for OT peter

fiveprime- shipping would be a lot but you would need a variable frequency drive (VFD) to get it to run, its 220v/50hz compared to our 120v/60hz

edit:

and a VFD is very expensive

[Jor3lBR]

sorry for OT peter

fiveprime- shipping would be a lot but you would need a variable frequency drive (VFD) to get it to run, its 220v/50hz compared to our 120v/60hz

edit:

and a VFD is very expensive

hey teyber, can they make them to run in 2 different 110v outlets?

[Moc]

No.

[sjg0]

hey teyber, can they make them to run in 2 different 110v outlets?

Short Answer:

No.

Long Answer:
Yes, but you would need a custom transformer, a VFD as Teyber said, you would need to rewire your house for probably 30A circuit, and have the unit custom-wired for this setup.

[Jor3lBR]

Short Answer:


Long Answer:
Yes, but you would need a custom transformer, a VFD as Teyber said, you would need to rewire your house for probably 30A circuit, and have the unit custom-wired for this setup.

Hey SIG0 thanks!

I'm here in Flagstaff. When you around to go skiing lets do some benching

[sjg0]

Hey SIG0 thanks!

I'm here in Flagstaff. When you around to go skiing lets do some benching

Np

Yea man for sure! Do you guys still have snow up there though? Winter ended a month ago down here

[piotres]

Another one :

Lenght of flex hose : 100 cm
Flex hose type : braided stainless DN10 (10 mm Inside diameter)
Evaporator : steeper 42mm diam/41 mm tall
Insulation : 18 mm thick + suction line sleeve black









Regards
Peter

[tiborrr]

Damn that's a beauty, Pieter! On the first picture the evap looked like it's been nickel plated, hehe.

[piotres]

Thanks

On 2nd pic I've tried to show how clean evap is inside .

[teyber]

serious! nice purging skills there!

[piotres]

Another one made today, GPU type, using OLD GPU suction line, evap is old revision, line today was brazed once again, pressure checkeck in water, and applied fresh insulation .

Lenght of flex hose : 100 cm
Flex hose type : braided stainless DN10 (10 mm Inside diameter)
Evaporator : steeper type GPU, old revision
Insulation : 18 mm thick + suction line sleeve black











Regards
Peter

[tiborrr]

I'd need your help with insulating my ghetto assembled units, these are really 1A. Too bad you live so far away

[piotres]

3 new :

1)
Lenght of flex hose : 128 cm
Flex hose type : braided stainless DN10 (10 mm Inside diameter)
Evaporator : steeper type CPU, 42mm diameter, 41mm tall
Insulation : 18 mm thick + suction line sleeve blue







-------------
2)
Lenght of flex hose : 100 cm
Flex hose type : braided stainless DN10 (10 mm Inside diameter)
Evaporator : steeper type CPU, 42mm diameter, 41mm tall
Insulation : 18 mm thick + suction line sleeve black









-------------
3)
Lenght of flex hose : 75 cm
Flex hose type : braided stainless DN10 (10 mm Inside diameter)
Evaporator : steeper type CPU, 42mm diameter, 41mm tall
Insulation : 18 mm thick + suction line sleeve black with small white stripe

To this suction line I've also add some 15/9 and 35/9 armaflex insulations to insulate rest of unit - suction line will be working with NL11F compressor .













Regards
Peter