Foxconn Bloodrage-Quantum Force- -X58- -Retail-

[Lu(ky]

1. Go to BIOS hit RESET DEFAULT
2. Then setup up everything sata enabled etc..
3. Go to BOOT priority and set your main C raid 0 slice to 1st
4. F10 save (note after reboot need to go back into bios again)
5. Go back into BIOS again and go to BOOT options and your raid 0 will appear set to 1st boot
6.F10 save then boot normal into windows..

I took a picture... since I couldn't manage to read it and scribble it down fast enough.... WTH.

I set everything back to raid in bios... Maybe I'm lost? But it still doesn't show me the drives in the bios.

Do the above they are there... DONOT go into the drive bios... You need to reset the raid in the normal bios above.. Some times after a bad oc I reset cmos, then go into bios and do the above 1-6. For some reason it needs to reset 2 times in bios before the raid 0 is found again..