** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[radaja]

im pretty happy with the performance im getting with this clock.gotta say these 9650's are beasts,i recommend that everyone should get one.heres my bios settings,hope it helps. BIOS F7 Q9650

MB Intelligent Tweaker(M.I.T.)

Robust Graphics Booster ..................: Auto
CPU Clock Ratio ..........................: 8
Fine CPU Clock Ratio......................: 0.5
CPU Frequency ............................: 4.318 (508x8.5)

Clock Chip Control
Standard Clock Control
CPU Host Clock Control....................: Enabled
CPU Host Frequency (Mhz) .................: 508
PCI Express Frequency (Mhz) ..............: auto
C.I.A. 2..................................: Disabled

Advanced Clock Control
CPU Clock Drive...........................: 1000mv
PCI Express Clock Drive...................: 1000mv
CPU Clock Skew (ps).......................: 0ps
MCH Clock Skew (ps).......................: 50ps

DRAM Performance Control
Performance Enhance......................: Turbo
MCH Frequency Latch......................: auto
System Memory Multiplier ................: 2.00D
Memory Frequency (Mhz) ..................: 1016
DRAM Timing Selectable ..................: Manual

Standard Timing Control
CAS Latency Time.........................: 5
tRCD ....................................: 5
tRP......................................: 4
tRAS.....................................: 12
Advanced Timing Control [Press Enter]
tRRD.....................................: [Auto]
tWTR.....................................: [Auto]
tWR......................................: [Auto]
tRFC.....................................: 30
tRTP.....................................: [Auto]
Command Rate (CMD) ......................: 0 [Auto]
Channel A
Channel A Timings Settings
Static tRead Value......................: 9
REST AUTO
Channel B
Channel B Timings Settings
Static tRead Value......................: 9
REST AUTO
Motherboard Voltage Control

Load-Line Calibration.....................: Enabled
CPU Vcore...............1.32500V..........: 1.4125
CPU Termination.........1.200V............: 1.420
CPU PLL.................1.500V............: 1.570
CPU Reference...........0.760V............: 0,924
MCH/ICH
MCH Core................1.100V............: 1.42
MCH Reference...........0.760V............: 0,939
MCH/DRAM Reference......0.900V............: Normal
ICH I/O.................1.500V............: Normal
ICH Core................1.100V............: Normal
DRAM
DRAM Voltage............1.800V............: 2,200
DRAM Termination........0.900V............: Normal
Channel A Address Vref..0.900V............:Normal
Channel B Address Vref..0.900V............:Normal

Advanced Settings
Limit CPUID Max. to 3.....................: Disabled
No-Execute Memory Protect.................: Enabled
CPU Enhanced Halt (C1E)...................: Disabled
C2/C2E State Support......................: Disabled
x C4/C4E State Support....................: Disabled
CPU Thermal Monitor 2(TM2) ...............: Disabled
CPU EIST Function.........................: Disabled
Virtualization Technology.................: Disabled