Quote Originally Posted by jcool View Post
Lol I can't even run 3x2gb D9GTR at these low voltage settings with 1600 CAS 8.. goes to show just how much depends on the CPU having a good IMC.

Oh yeah, I can't go to S3. S4 works fine but S3 will power down, power button blinking. When I hit the button it starts the mobo but hangs at "CF" so I have to shut it down & restart it like 2-3 times. Sometimes it will also reset BCLK (but not the entire bios).
BCLK too high? Tried at 211x19 and also backed down to 200... no go.

Oh yeah, official 114 bios.
CF post led and symtoms are all nearly signs of lack of vdimm voltage so try more vdimm and hence more cpu vtt

Quote Originally Posted by msgclb View Post
I couldn't get my DFI LP UT X58 with the 0106 BIOS and my 920 to boot with a BCLK above 170. I've flashed the BIOS to 0114 using a bootable USB drive and will see if that helps. I started with the BIOS setting in the first post and adjusted them to my system.

I tried both Vista 64-bit SP1 and XP Pro 32-bit SP3. I suspect that I'll be doing a major swap of components with my P6T sooner than I anticipated.
voltages used http://i4memory.com/f80/dfi-lp-ut-x5...emplate-12919/ ?