raise your vtt to 1.30-1.32v actual. you are using way too low of a vtt, pll should be about 1.58-1.60v real too or else it'll conflict with sb_pll voltage, manually set sb_pll to 1.5v so it reads 1.50-1.52v.
raise your vtt to 1.30-1.32v actual. you are using way too low of a vtt, pll should be about 1.58-1.60v real too or else it'll conflict with sb_pll voltage, manually set sb_pll to 1.5v so it reads 1.50-1.52v.
DFI LT-X48-T2R UT CDC24 Bios | Q9550 E0 | G.Skill DDR2-1066 PK 2x2GB |
Geforce GTX 280 729/1566/2698 | Corsair HX1000 | Stacker 832 | Dell 3008WFP
Posting Permissions
Reply With Quote
Bookmarks