Sure here it is.Originally Posted by Darknezz
CPU Clock: 4.23GHz
Processor: E8400 E0
BIOS: 1307
Code:Ai Overclock Tuner: Manual OC From CPU Level Up: Auto Ratio CMOS Setting: 9 FSB Frequency: 470 CPU Clock Skew: Normal NB Clock Skew: Normal FSB Strap to North Bridge: 333 DRAM Frequency: DDR2-1129MHz DRAM CLK Skew on Channel A1: Normal DRAM CLK Skew on Channel A2: Normal DRAM CLK Skew on Channel B1: Normal DRAM CLK Skew on Channel B2: Normal DRAM Timing Control: Manual 1st Information: CAS# Latency: 5 DRAM Clocks DRAM RAS# to CAS# Delay: 5 DRAM Clocks DRAM RAS# Precharge: 5 DRAM Clocks DRAM RAS# Activate to Precharge: 15 DRAM Clocks RAS# to RAS# Delay: 3 Row Refresh Recycle Time: 40 DRAM Clocks Write Recovery Time: 6 Read to Precharge Time: 3 2nd Information: Read to Write Delay (S/D): 8 Write to Read Delay (S): 3 Write to Read Delay (D): 5 Read to Read Delay (S): 4 Read to Read Delay (D): 6 Write to Write Delay (S): 4 Write to Write Delay (D): 6 3rd Information: Write to PRE Delay: 14 Read to PRE Delay: 5 PRE to PRE Delay: 1 All PRE to ACT Delay: 5 All PRE to REF Delay: 5 DRAM Static Read Control: Enabled DRAM Read Training: Enabled MEM. OC Charger: Disabled Ai Clock Twister: Moderate Ai Transaction Booster: Manual Common Performance Level: 8 Pull-in of CHA PH1: Disabled Pull-in of CHA PH2: Disabled Pull-in of CHA PH3: Disabled Pull-in of CHA PH4: Disabled Pull-in of CHA PH5: Disabled Pull-in of CHB PH1: Disabled Pull-in of CHB PH2: Disabled Pull-in of CHB PH3: Disabled Pull-in of CHB PH4: Disabled Pull-in of CHB PH5: Disabled PCIE Frequency: 100 CPU Voltage: 1.33750 (1.272v load in cpuz, 1.263v load in LCD POSTER) CPU PLL Voltage: 1.50000 FSB Termination Voltage: 1.25900 DRAM Voltage: 1.95900 North Bridge Voltage: 1.27225 South Bridge 1.5 Voltage: 1.50000 South Bridge 1.1 Voltage: 1.10000 CPU GTL Reference (0): +60mv CPU GTL Reference (1): +20mv CPU GTL Reference (2): +60mv CPU GTL Reference (3): +20mv NB GTL Reference: -60mv DDR2 ChA Reference Voltage: Auto DDR2 ChB Reference Voltage: Auto North Bridge DDR Reference: Auto CPU Configuration: Ratio CMOS Setting: 9 C1E Support: Disabled Max CPUID Value Limit: Disabled Intel Virtualization Tech: Enabled CPU TM Function: Enabled Execute Disable Bit: Enabled Load-Line Calibration: Disabled CPU Spread Spectrum: Disabled PCIE Spread Spectrum: Disabled
Reply With Quote
Bookmarks