try backing off timings as if you have old non-triple channel D9GTR could be spd is too tight and with 3x2GB you probably need more volts than most modules...Originally Posted by jcool
Yeah sure, but read again, I can't even get the 8x to work stable at 192 BCLK, half of the time it freezes or bluescreens during boot already
Any ideas on that?
Always use memtest86+ v2.11 to see where you before booting windows, as where memtest freezes or errors will indicator what you need to do to overcome those errors. Playing with volts etc and re-testing in memtest86+ to see if you overcome those errors
try
starting with loose subtimings
DRAM Command Rate: AUTO or 2T
CAS Latency Time (tCL): 9
RAS# to CAS# Delay (tRCD): 9
RAS# Precharge (tRP): 9
Precharge Delay (tRAS): 24 to 28
REF to ACT Delay (tRFC): 88 to 110
Write to PRE Delay (tWR): AUTO
Rank Write to Read (tWTR): 16 to 20 depending on ram frequency and timings and mem divider
ACT to ACT Delay (tRRD): 6 to 8
Row Cycle Time (tRC): 31
Read CAS# Precharge (tRTP): 6 to 8
Four ACT WIN Time (tFAW): 31
Reply With Quote
Bookmarks