Quote Originally Posted by fatguy1992 View Post
I just did a quick test on my Q6600

3.6GHz @ 1.296v

I'd run prime 95 longer but its so boring .
You sure the CPU-Z readout is correct, I have high doubts about my P45T-UD3P... also you put 1.425 and get 1.296, that's a big difference even with LLC disabled on such a modern board...
My CPU-Z stays put with or without LLC around 1.2 with 1.23-1.26 set in bios with LLC enabled ( E8500 CPU does 4ghz with 1.18volts on the P5Q Dlx) and doesn't even move when being stresses with Linpack...

Only a DMM will bring the correct voltage...