UNOFFICIAL BIOSTAR TPower I45 M/B

[LedHed]

You have Config by SPD set to disabled, but didn't tell us your timings.We'll need those. Which memory ratio are you using? You'll probably also need to add some nb voltage at or over that FSB. What are your load temps under small FFTs? For reference, my Reapers are good for PL9 at 1:1 up to 535mhz with 5-5-5-12-48 with 2.168v(actual).

--Matt

After full load of Orthos Dual Beta for 4.5 hours the temp was 62C @ 1.39V

Here are the rest of the memory settings:

FSB to NB Latch: FSB 1066
DRAM Freq: DDR2 1000

RComp Configuration 3

PL: 10T
tCL: 5
tRP: 5
tRCD: 5
tRAS: 15
tWR: 6
tRFC: 42
tWTR: 3
tRRD: 3
tRTP: 3

Write Precharge Delay: 14
Read Precharge Delay: 4
Precharge All to Act Delay: 4
Precharge All to Refresh Delay: 4
R-to-W Delay: 8
R-to-R Delay: 4
W-to-R Delay: 11
Refresh Counter: 2600T

Also are there any other settings that can have an effect on OCing besides SpeedStep and CE1?