Gigabyte EX58-UD5/Extreme Discussion Thread

[freshy]

and ive disabled everything et6 still doesnt work for me , might have to load up vista 64 bit see if that does anything

Hey Freshy ..

I think you were onto something with these settings ..

http://www.xtremesystems.org/forums/...&postcount=657

I used exactly these settings & been priming for 90mins + now which is farthest I've ever got at at 4Ghz CPU clock .. lowest temps too ..

But I'm confused about your Vcore .. your later posts here are saying you had to up the Vcore to ~1.39V after BIOS updates ..

But then the link in your sig to 4Ghz settings show Vcore of only 1.328V (CPU-Z) .. back on 12-10-2008 ..

http://www.xtremesystems.org/forums/...&postcount=761

So what were you using for that test ? QPI/Vtt volts etc ?

these were the settings for whats in my sig, but like i said after i flashed bios i needed more vcore
voltages for 4.2ghz 8 hours 38 mins of prime
200 x 19 + turbo, HT on
cpu vcore 1.55v
qpi/vtt 1.535v
cpu pll 1.88v
qpipll 1.18v
ioh core 1.24v
ich i/o 1.58v
ich core 1.22v
vdimm 1.66v
qpi link was x36
and uncore was running at 3400mhz
____________________________________
voltages for 4.137ghz stopped after 14 hours of prime
197 x 19 + turbo, HT on
qpi link x 36
uncore frequency x17
vcore 1.49375v
qpi/vtt 1.495v
cpu/pll 1.88v
qpi/pll 1.18v
ioh core 1.14v
ich i/o 1.58v
ich core 1.16v
vdimm 1.66v
_________________________________________
voltages for 4.1ghz 14 hours prime
195 x 19 + turbo HT on
qpi link x36
uncore frequency x18
cpu vcore 1.45v
qpi/vtt 1.435v
vdimm 1.64v
everything else auto
_________________________________________
voltages for 4ghz 13 hours prime
191 x 19 + turbo , HT on
qpi link x36
uncore frequency x18
vcore 1.375v
qpi/vtt 1.315v
vdimm 1.64v
rest auto

edit... im trying out f4r now

[MarkJohnson]

at first EasyTune 6 wasn't working for me either. I had been using a hard drive off my X38 board and plugged it into this board and it took. I had SP2 installed on my Vista Ult. x64 and EasyTune 6 would give an AppCrash error and then when I clicked continue it would give me a windows sockets initialization error. Not sure if you all got that same error or not.

I thought maybe it was SP2, so I reinstalled Vista Ult x64 and loaded EasyTune 6 just after my lan drivers and it worked fine. I then installed SP2 then my drivers and it still worked.

Hope this helps someone.
-=Mark=-