I am using F4M for extreme, just ran prime 6.5 hrs, first 2 hrs were combined with Linx max memory (that will usually crash my OC if its going to crash, rather than waiting for prime reboot at 8 hr mark)...stability seems same on mine. F4m has pink "warning font" when you get into higher volts. When manually entering mem settings, 8,8,8, instead of scrolling for CAS entry, you can hit 8 enter, which is faster imo for manually entering instead of scrolling. Couple other minor changes. But works fine for me. And does anyone run their ram with different main timings in different 3 channels? Would like to manually enter in 8,8,8, 24 or whatever once, not 3 times.

Also, wish they would start vcore at like .8-.9v. Not supposed to use lower than that anyways...getting tired of scrolling through a mile of useless volts.

I second the vdroop issue. I wish they would make vcore bios = vcore idle = vcore load. Then just tell us the approximate overshoot volts (percentage/formula whatever) over in comments somewhere.... instead of making it bios = max overshoot volts, feed your idle cpu way more vcore than it needs and cut off the juice when you need it at load. If it wasnt for LLC, I would mod every board. LLC is tolerable enough to avoid modding for me anyways, but could be better.