Quote Originally Posted by hokiealumnus View Post
Dro, in case you still need them, E8400 (E0 stepping) 24/7 Folding@Home stable overclocks:

4.0GHz
445 x 9
Vcore - +.075
Vdimm - +.150
Vchipset - +.025
Vfsb - Auto
Core1GTLREF - .63
Core2GTLREF - .67
MCHGTLREF - Auto
CPU PLL - 1.5v
Clock Skew - Auto

4.25GHz
500x8.5
Vcore - +.150
Vdimm - +.150
Vchipset - +.225 (this could potentially be lowered; haven't had time to try)
Vfsb - Auto (same as above)
Core1GTLREF - .63
Core2GTLREF - .67
MCHGTLREF - Auto
CPU PLL - 1.5v
Clock Skew - 200ps

C1E / EIST are disabled for both of them.
@Hokiealumnus

what would be a good setting to get 4.3ghz at 478x9=4.302
without cranking the cpu voltage up pass +0.125? can you
work with the Fsb Voltage and chipset voltage and whats
the maxs volts on them both to adjust them to?

4.302GHz
478 x 9
Vcore - ?
Vdimm - ?
Vchipset - ?
Vfsb - ?
Core1GTLREF - ?
Core2GTLREF - ?
MCHGTLREF - ?
CPU PLL - 1.5v
Clock Skew - ?

right now i'm at 4.2ghz stable tested with intelburntest after (maxs stress 1) 5 passes but failed orthos after 38mins fft's cpu stress..I don't know why that happen that you pass 1 but not the other but. I left the setting where they are another thing..I tryed loosen up the memory & adjusting volts
around without messing with the cpu volts..I wanna keep that there trying
to get low cpu volts and high clocking ability if possible if not..i'll stay here



here's my setting now

468 x 9
Vcore - +0.125
Vdimm - +0.250
Vchipset - +0.200
Vfsb - +0.250
Core1GTLREF - 63*
Core2GTLREF - 63*
MCHGTLREF - 0.59
CPU PLL - 1.5v
Clock Skew - 200

memory is on config 1

any suggestions?