Quote Originally Posted by rge View Post
You are assuming auto will result in same settings with 19 vs 20 multi on an immature bios, you might be right, but my bios was changing auto settings as I made other changes. I would at least make sure your auto uncore is on 16x, ie 3200 mhz 16x200 when you go from 19 to 20 multi, ie make sure it does not change. I took all the important things off auto, especially after watching them change for worse when i boot up at different settings. My mem timings if left on auto on some multis will try and boot at 6,6,6 18, and when it fails it will kill my OC and then boot up at 6,6,6, 18, despite a rating of 1600 at 8,8,8 24. Bios definitely immature, I dont trust auto for much. But loadline definitely helps on mine.

i checked qpi and memory, it stayed the same as it was with 19 multi...i know sometimes the auto features doesn't make good decision, but i was able to verify it was keeping the good multis (3600 qpi / 3200 nb)

loadline calibration did not help, i think either it's not reachable for my cpu or it needs too much vcore...
or maybe there is something with the imc now