-
I get reboots ever so often
do i need more settings ?
FSB frequency: 450
Cpu ratio setting: 08.5
Dram frequency: 901
Dram commamd rate: 2T
Dram timing control: 5-5-5-15
Cpu voltage: 1.28
Loadline calibration: enabled
Cpu PLL voltage: auto
FSB termination voltage: 1.4
Cpu gtlref: +30mv
NB gtlref: +40mv
NB voltage: 1.4
Dram voltage: auto
NB ddrvref: +50mv
DDR3 channelA vref: auto
DDR3 channelB vref: auto
SB voltage: auto
Cpu spread spection: disabled
PCIE spread spection: disabled
C1E support: disabled
CPU TM function: disabled
Max cpuid value limit: disabled
Vanderpool technology: disabled
Execute disabled bit: disabled
Core Muti processing: enabled
WANT TO TRY SOMETHING LIKE THIS
Ai Overclock Tuner : Manual
OC From CPU Level Up : AUTO
CPU Ratio Control : Manual
- Ratio CMOS Setting : 8.5
FSB Frequency : 471
CPU Clock Skew : Auto
North Bridge Clock Skew : Auto
FSB Strap to North Bridge : 333
DRAM Frequency: DDR2-943Mhz
Dram Clock Skew CH1 A1 : Auto
DRAM Clock Skew CH1 A2 : Auto
Dram Clock Skew CH1 B1 : Auto
Dram Clock Skew CH1 B2 : Auto
DRAM Timing Control: Manual
CAS# Latency : 5
RAS# to CAS# Delay : 5
RAS# Precharge : 5
RAS# ActivateTime : 15
RAS# to RAS# Delay : Auto
Row Refresh Cycle Time : Auto
Write Recovery Time : Auto
Read to Precharge Time : Auto
Read to Write Delay (S/D) : Auto
Write to Read Delay (S) : Auto
Write to Read Delay (D) : Auto
Read to Read Delay (S) : Auto
Read to Read Delay (D) : Auto
Write to Write Delay (S) : Auto
Write to Write Delay (D) : Auto
Write to PRE Delay : Auto
Read to PRE Delay : Auto
PRE to PRE Delay : Auto
ALL PRE to ACT Delay : Auto
ALL PRE to REF Delay : Auto
DRAM Static Read Control: Disabled
Dram Read Training : Disabled
MEM OC Charger : Enabled
Ai Clock Twister : Auto
Transaction Booster : Manual
Common Performance Level [10]
Pull-In of CHA PH1 Enabled
Pull-In of CHA PH2 Enabled
Pull-In of CHA PH3 Enabled
Pull-In of CHA PH4 Enabled
Pull-In of CHA PH5 Enabled
Pull-In of CHB PH1 Enabled
Pull-In of CHB PH2 Enabled
Pull-In of CHB PH3 Enabled
Pull-In of CHB PH4 Enabled
Pull-In of CHB PH5 Enabled
PCIE Frequency : 100
CPU Voltage : 1.40000v
CPU PLL Voltage : 1.56625v
FSBT : 1.27225v
DRAM Voltage : 1.90600v
North Bridge Voltage : 1.25900v
South Bridge Voltage 1.5 : 1.50000v
South Bridge Voltage 1.1 : 1.10000v
CPU GTL Reference 0 : Auto
CPU GTL Reference 1 : -40mv
CPU GTL Reference 2 : Auto
CPU GTL Reference 3 : -40mv
North Bridge GTL Reference : +10mv
DDR2 Channel A REF Voltage : AUTO
DDR2 Channel B REF Voltage : AUTO
North Bridge DDR Reference : AUTO
Load Line Calibration : Enabled
CPU Sread Spectrum : Disabled
PCIE Spread Spectrum : Disabled
"ASUS Maximus II Formula LGA 775 Intel P45 ATX Intel Motherboard - Retail
EVGA 896-P3-1267-AR GeForce GTX 260 Core 216 Superclocked Edition 896MB 448-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card - Retail
Intel Core 2 Quad Q9550 Yorkfield 2.83GHz LGA 775 95W Quad-Core Processor Model BX80569Q9550 - Retail
Arctic Silver 5 Thermal Compound - OEM
ZALMAN CNPS9700 LED 110mm 2 Ball CPU Cooler - Retail
CORSAIR DOMINATOR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model TWIN2X4096-8500C5DF - Retail"
Last edited by EaglePC; 11-19-2008 at 04:32 AM.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks