Quote Originally Posted by CryptiK View Post
It may be the board but I doubt it. I'm actually leaning towards it being your cpu. Try decreasing the cpu speed until you find stability at the same vcore, only using 2 ram modules. Once it is stable, put the other 2 ram modules in again and re-test it.
Actually, i did this in the beginning. With 1.375 (Or 1.4v, doesn't make that difference under water)vCPU, 1.47 vNB, 1.52CPU PLL, 1.34 FSBt with 65x GTLREF it's rock stable. No lockups, Prime95 for hours. This is with 2 and 4 sticks. Also did try 472 with 8.5 and 8 ratio with 2 sticks - it won't load windows at all. So it's FSB issue, but i don't know which is better - CPU or MB. I have here GA-P35-DS3R i'll see if it gonna boot at 472. At this time, any ideas would be greate (: