Fan controllers, AQUAERO VS mCubed T-Balancer (updated)

[Brodholm]

There seams to be alot of different opinions about this. And I am getting more and more confused

I really like the interface of the Aquaero but as said before it only handles 10w per channel and not more than a total of 30w. Where the Mcubed can take 20w per channel and 80w total. I will have 2 Thermochill radiators and they will have 3 fans each. That is a total of 6 there. And that will be 2 channels because a aquaero only takes 10w per channels and a yate loon takes about 3w each.

That will be fine if I'm going to settle with 2 loops but I don't know yet. Else I want all the fans on the same channel. But maybe you can set the aquaero to rise the speeds on 2 channels when a temperature rises, I don't know.

I will probably have a total of 9 or 10 fans in my new chassis. One for the hhd's another in the cpu area and maybe 2 for each pump. That will be 30w if all fans are at full speed. That maybe is pushing it for the Aquaero?

I want in the controller to do the following if that's possible:
Rise/lower the fans rpm according to temperature levels and finally shut them down if the temps is good enough.
Be able to read temperatures from different sensors. Like This one.
Shutdown the computer IF temps get to high or pump malfunction.
If it could control the pump that would be great. But not necessary because if I'm going to get a Swiftech MCP655 because you can set the speed manually. But I think Aquaero can control there aquastream pump.
well that's about it. And of course it is nice if the program is easy to control.

What is the differences with the AC aquaero 4.00 USB - VF-Display And AC aquaero 4.00 USB - white/blue it is almost 50% more expensive.

And one more question about pumps. If you have any experiences of the following pumps feel free to share it. The AC aquastream XT USB 12V Pump and in English (English url) and the Laing D5 Vario/Swiftech MCP655. They cost about the same (the aquastream is abit more expensive) but I don't know that much about the aquastream XT. I cant find any infos on noise, connection size, pressure, flow etc. So wich one is the best pump? It should be quiet, have good quality and be able to do one loop with 2 thermochills PA120.3, D-TEK FuZion v2, EK 150 Reservoir and one XSPC fullcover 4870x2. I don't even know if one of them can handle that loop that is why I may be going 2 loops.

dohh, as usual it is alot of questions I hope someone have some of the answers ^^