**Official DFI LanParty UT P35-T2R Review/Overclock/Guide Thread**

[J0kke]

This is my setup:
Intel E8200 with Xigmatek HDT-S1283 sitting on it
DFI UT P35 T2R
Crucial BallistiX PC8500 2*1gb 1066 cl5
GeForce 8800 GTS 320mb
Samsung T166 500Gb
Samsung Sata DWD drive
Antec NeoHE 430W

Hey guys, I have read alot of this topic, and succeeded to get my E8200 to be stable at 8 x 500, in normal use its rock solid and orthos ran couple hours without errors. But when I try to play NFS Pro street I get bluescreens all the time, COD4 runs great many hours. I use these settings in BIOS:

CPU vcore: AUTO
CPU special add: 112.28%
NB voltage: 1.57V
MEM: 2.27V
CPU PLL: 1.75v
Clockgen: 3.60V
CPU VTT: 1.250V
C1E and EIST enabled
Vcore droop control: enabled
GTL values: are something like this Core0/Core1/NB : 62/60/63
MEM is set at 1:1 divider, and I run it @ 1000Mhz 4-4-4-12 with no problems.

I only have problems with NFS pro street. I'd like to get it run stable too, what should I do, and could someone explain how to get right GTL values. I took those from this topic. What does CPU VTT voltage do? Your help is needed!