Broke Quad + 8GB + 500FSB+ Barrier with Max Formula

[19*12 gamer]

I flashed it to rampage, its a bit more complicated now but i get most of the settings and got 8.5*500 stress stable for 18+ minutes:
Managed to get Orthos small FFT's stress test stable for 18+min (stopped the test, all temps stay below 42degrees C)

My settings for that are:
Ai Overclock Tuner : Manual
CPU Ratio Control : Manual
- Ratio CMOS Setting : 8.5
FSB Frequency : 500
FSB Strap to North Bridge : 333
PCI-E Frequency: 100
DRAM Frequency: DDR2-1002
DRAM Command Rate : 2T
DRAM Timing Control: Manual
CAS# Latency : 5
RAS# to CAS# Delay : 5
RAS# Precharge : 5
RAS# ActivateTime : 18
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time : AUTO
Write Recovery Time : AUTO
Read to Precharge Time : AUTO

DRAM Static Read Control: disabled
Ai Clock Twister : lighter
Transaction Booster : auto (0-30 dont get this??)

CPU Voltage : AUTO //reads in BIOS/cpuz/cpuid: 1.304v
CPU PLL Voltage : 1.50 // 1.58v
North Bridge Voltage : 1. 51 // 1.51v
DRAM Voltage : AUTO // 2.1v
FSB Termination Voltage : 1.6// 1.5v
South Bridge Voltage : AUTO
Loadline Calibration : Enabled
CPU GTL Reference : AUTO //Dont get this 2
North Bridge GTL Reference : AUTO //and this (0.67*-0.62* = %?)
DDR2 Channel A REF Voltage : AUTO
DDR2 Channel B REF Voltage : AUTO
DDR2 Controller REF Voltage : AUTO
SB 1.5V Voltage : AUTO

CPU Spread Spectrum : Disabled
PCIE Spread Spectrum : Disabled

Tried 3 hours to get 500*9 working but could not boot windows nomatter what, while 520*8.5 is able to boot vista and make screens but not stress the system...