Quote Originally Posted by radaja View Post
@cryptik ill give it a try. no to the ram , im going to get a new set any suggestions ,also would 2x1 kit be better for over clocking.UPDATE just tried 1.2 and 1.25 failed prime within 1 second tried 1.24 vfsb 1.25 vnb failed after 45 seconds
That certainly is strange. What are your NB temps like?

Quote Originally Posted by Shiranui Gen-An View Post
Speaking of CellShock GKX, it looks like my Maximus II likes them fairly well, as it can clock them to 600MHz CAS5 without giving errors in Memtest, my only Intel-based board that can do so. BTW, does anyone know the VDIMM voltage read point(s) on this board?
Yeah it seems to go well with GMH/GKX, I can get 1200 stable, and can bench @ 1320 CL5. I'm sure it could go higher if I got aggressive with the vdimm.

You can measure vdimm from the 2 mosfets above the dimm slots, but the voltage at each fet may differ, as the mem VRM is 2 phase.

Quote Originally Posted by screwtech02 View Post
Anybody else getting random reboots, with all your bios settings lost??? I ended up having to reformat due to a unknown "uncorrectible hardware error" on my box that has been "stable" for more than 2 weeks now... Took me over a hour to get the vid cards to be recognized, i was runnin kets mod bios, but have since reverted back to the ASUS 1307. If this keeps up, im gonna slam my P5E back in and RMA the damn thing.... Ugh.....
No such issues here. Have you tried setting your vFSB & vNB no furhter apart than 0.11v? (eg: if vFSB = 1.2v, set your vNB no higher than 1.31v)

Quote Originally Posted by SiGfever View Post
I have been playing a little more with my settings and here is where I am at with the memory, still a long way to go but mid week I should have a couple new chips to play with.
Not bad

Quote Originally Posted by radaja View Post
this is with all volts set to auto except, vdimm set manually to 1.90 and cpupll set manually to 1.50(auto set 1.69). is this normal?also i have this wierd problem of my ch-5 pull ins disappearing and reappearing on every other boot, anyone else seeing this?
At stock FSB, auto settings should give low/normal voltages, it's only when you start raising the FSB that the auto settings start to overvolt a lot.