Quote Originally Posted by nordicdiver View Post
Hi,
Jumped from a 680i board to P5Q Deluxe. I had my Q6600 G0 running on 3.7 on the 680i stable after several mods. Now on this board I popped in the cpu and upped the voltage and fsb so its now stable on 3.8 and it boots fine on 4.0 too but the temps are to high on air cooling then. BUT this cant be right, no modding or no other settings !?
Should I change any other settings to make the board last longer/add the optional fan on nb..?
bios 1402, china board, 423*9, 1.42V.

Thanks to all for this thread.
I assume your voltages besides vcore and ram are all AUTO, plz set PLL, FSB Term and NB voltage yaself as they are way too high : Have a look at this chart what 450FSB does with AUTO voltage setting :



Try these plz with ya current OC and try to go as low as possible from there :


CPU GTL Voltage Reference (0/2): AUTO
CPU GTL Voltage Reference (1/3): AUTO
CPU PLL Voltage: 1.6
FSB Termination Voltage: 1.3

NB Voltage: 1.26
NB GTL Reference: AUTO
SBridge Voltage: AUTO
PCIE SATA Voltage: AUTO