ASUS P5Q-E (P45) pre-view

[MorGo7h]

Set these to AUTO plz :

FSB Strap to North Bridge .......... [AUTO]
DRAM Read Training ................. [AUTO]
MEM. OC Charger .................... [AUTO]
Ai Clock Twister ................... [AUTO]

vFSB.....................................[1.22]

Thx, gonna try it now

EDIT: I can boot with this http://valid.x86-secret.com/show_oc.php?id=418962, but orthos errors after 6 seconds

Settings I'm using now:

Ai Overclock Tuner ................. [Manual]
CPU Ratio Setting .................. [9]
FSB Frequency ...................... [445]
PCIE Frequency ..................... [100]
FSB Strap to North Bridge .......... [Auto]
DRAM Frequency ..................... [891]
DRAM Clock Skew on Channel A1 ...... [Auto]
DRAM Clock Skew on Channel A2 ...... [Auto]
DRAM Clock Skew on Channel B1 ...... [Auto]
DRAM Clock Skew on Channel B2 ...... [Auto]
DRAM Timing Control ................ [Manuel] (5-5-5-15)
DRAM Static Read Control ........... [Disabled]
DRAM Read Training ................. [Auto]
MEM. OC Charger .................... [Auto]
Ai Clock Twister ................... [Auto]
Ai Transaction Booster ............. [Auto]
____________________________________

CPU Voltage ........................ [1.3500]
CPU GTL Voltage Reference (0/2) .... [Auto]
CPU GTL Voltage Reference (1/3) .... [Auto]
CPU PLL Voltage .................... [1.54]
DRAM Voltage ....................... [2.2]
vFSB.....................................[1.22]

NB Voltage ......................... [1.28]
NB GTL Reference ................... [Auto]
SB Voltage ......................... [Auto]
PCIE Voltage ....................... [Auto]
____________________________________

Load-Line Calibration .............. [Enabled]
CPU Spread Spectrum ................ [Disabled]
PCIE Spread Spectrum ............... [Disabled]
CPU Clock Skew ..................... [Auto]
NB Clock Skew ...................... [Auto]
CPU Margin Enhancement ............. [Optimized] Dno whats best?