Quote Originally Posted by Leeghoofd View Post
Give her some more Vcore mate, set eg 1.375 which will be 1.33 under CPU-Z, those are really low volts you are setting for 4.2Ghz ops... if this was an EO E8500, I would say okay but not for a CO model...
I'll try bumping it up, but only Core # 2 is erroring out... That's why I wanted to try and maybe dail in the GTL voltages for that core specifically.

Which GTL controls the voltages for the 2nd CPU, GLT (0/2) or GTL (1/3)? And would would be a good reference point for GTL tweaking to start at? I know GTL values are based on VTT (which should be roughly .67 of VTT), but for these Asus boards it's not intuitive at all.