I'm posting my template for the 4.25GHz OC. What can I change to get higher clocks without adding a ton of vCore?
Code:Ai Tweaker Ai Overclock Tuner ................. [Manual] CPU Ratio Setting .................. [Auto] FSB Frequency ...................... [425] PCIE Frequency ..................... [100] FSB Strap to North Bridge .......... [Auto] DRAM Frequency ..................... [1021] DRAM Clock Skew on Channel A1 ...... [Auto] DRAM Clock Skew on Channel A2 ...... [Auto] DRAM Clock Skew on Channel B1 ...... [Auto] DRAM Clock Skew on Channel B2 ...... [Auto] DRAM Timing Control ................ [Manual] 1st Information : 5-5-5-15-3-52-6-3 CAS# Latency ..................... [5 DRAM Clocks] DRAM RAS# to CAS# Delay .......... [5 DRAM Clocks] DRAM RAS# Precharge .............. [5 DRAM Clocks] DRAM RAS# Activate to Precha ..... [15 DRAM Clocks] RAS# to RAS# Delay ............... [Auto] Row Refresh Cycle Time ........... [Auto] Write Recovery Time .............. [Auto] Read to Precharge Time ........... [Auto] 2nd Information : 8-3-5-4-6-4-6 READ to WRITE Delay (S/D) ........ [Auto] WRITE to READ Delay (S) .......... [Auto] WRITE to READ Delay (D) .......... [Auto] READ to READ Delay (S) ........... [Auto] READ to READ Delay (D)............ [Auto] WRITE to WRITE Delay (S) ......... [Auto] WRITE to WRITE Delay (D) ......... [Auto] 3rd Information : 14-5-1-6-6 WRITE to PRE Delay ............... [Auto] READ to PRE Delay ................ [Auto] PRE to PRE Delay ................. [Auto] ALL PRE to ACT Delay ............. [Auto] ALL PRE to REF Delay ............. [Auto] DRAM Static Read Control ........... [Disabled] DRAM Read Training ................. [Disabled] MEM. OC Charger .................... [Enabled] Ai Clock Twister ................... [Moderate] Ai Transaction Booster ............. [Manual] Common Performance Level ......... [08] Pull-In of CHA PH1 ................. [Disabled] Pull-In of CHA PH2 ................. [Disabled] Pull-In of CHA PH3 ................ [Disabled] Pull-In of CHA PH4 ................ [Disabled] Pull-In of CHA PH5 ................ [Disabled] Pull-In of CHB PH1 ................ [Disabled] Pull-In of CHB PH2 ................ [Disabled] Pull-In of CHB PH3 ................ [Disabled] Pull-In of CHB PH4 ................ [Disabled] Pull-In of CHB PH5 ................ [Disabled] ____________________________________ CPU Voltage ........................ [1.39375] * Actual = 1.376V under load) * CPU GTL Voltage Reference (0/2) .... [0.650] CPU GTL Voltage Reference (1/3) .... [0.670] CPU PLL Voltage .................... [1.52] DRAM Voltage ....................... [1.86] NB Voltage ......................... [1.12] NB GTL Reference ................... [Auto] SB Voltage ......................... [Auto] PCIE Voltage ....................... [Auto] ____________________________________ Load-Line Calibration .............. [Enabled] CPU Spread Spectrum ................ [Disabled] PCIE Spread Spectrum ............... [Disabled] CPU Clock Skew ..................... [Auto] NB Clock Skew ...................... [Auto] CPU Margin Enhancement ............. [Performance Mode] ____________________________________ Advanced > CPU Configuration CPU Ratio Setting .................. [Auto] C1E Support ........................ [Enabled] Max CPUID Limit .................... [Disabled] Intel® Virtualization Tech ......... [Disabled] CPU TM Function .................... [Enabled] Execute Disable Bit ................ [Enabled] Intel® Speedstep(TM) Tech .......... [Enabled] Intel® C-STATE Tech ................ [Enabled]



Reply With Quote

Bookmarks