ASUS P5Q-E (P45) pre-view

[Quad-Damage]

Dee my old setup was not stable at all, I changed everything back to auto and left the ram at 5 5 5 15 and the ram volts to auto and put the v core at 1.35 and the fsb to 420

and it's a stable 4.2 now, and prime stable for 4 hours
About time


It's with the 1201 board as well ket's.

[ahmad]

I looked as close as I could and there is nothing obvious in the slot. Not sure why the yellows won't work either, but maybe it's down to the RAM I'm using? 2GB CellShock is on it's way next week so we'll see how that works out. If it won't work in the yellow slots either I might have to RMA this board.

Where do I find the rev.# of the board, Ahmad?

Above the first pci slot, beside the name in small print. I just checked mine 1.01g. I got it pretty recent.

Dee my old setup was not stable at all, I changed everything back to auto and left the ram at 5 5 5 15 and the ram volts to auto and put the v core at 1.35 and the fsb to 420

and it's a stable 4.2 now, and prime stable for 4 hours
About time


It's with the 1201 board as well ket's.

Well I told you your ram cannot handle that speed you didnt believe me

[Dee]

Above the first pci slot, beside the name in small print. I just checked mine 1.01g. I got it pretty recent.

Ah, OK thanks. I'll check it tomorrow when I take the case side off.

Dee my old setup was not stable at all, I changed everything back to auto and left the ram at 5 5 5 15 and the ram volts to auto and put the v core at 1.35 and the fsb to 420

and it's a stable 4.2 now, and prime stable for 4 hours
About time


It's with the 1201 board as well ket's.

Glad to hear you got it stable. Mine is Prime (small FFT) stable at 4.3x GHz but it just won't boot at high FSB's + low multi's. The more I think about it the more I wanna get rid of this board and try a Deluxe. I think I got a flaky board, it hasn't been right since day 1.