WOW. I need at least 1.48v on the NB for 460MHz FSB and 333 strap. I think your vNB is way too low for 430MHz FSB, just crank it to 1.4 then test and you can tweak it if you want to conserve on the volts later once its stable.Originally Posted by Dee
Thank you. I'll try your suggestions.
Yes, the 1.12 for PLL was an error, it's 1.52.
I will raise VTT from 1.12 a little. The Auto strap is defaulting to 333, btw.
More than likely this is your problem.
My watercooling experience
Water
Scythe Gentle Typhoons 120mm 1850RPM
Thermochill PA120.3 Radiator
Enzotech Sapphire Rev.A CPU Block
Laing DDC 3.2
XSPC Dual Pump Reservoir
Primochill Pro LRT Red 1/2"
Bitspower fittings + water temp sensor
Rig
E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB
I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.
Posting Permissions
Reply With Quote
Bookmarks