My GTLs are set almsot the opposite, any tweeking and I'm not stable at 400 FSB...my 03/ 1/2 are much lower than the NB GTL... I think you do not have any C1 stepping CPUs this seems to be the case with them. All GTL rules are thrown out with these chips Which is likely why I can't hit the 450 FSB target and have such a hard time hitting even 400 FSB. Adjusting voltages is much easier than adjusting magic GTL's. Perhaps now that I have some working numbers I cna calculate ratios on my own. Its very timme consuming though. I still need to get pics for everyone of those SMD probes but I haven't been home for a weekend in some time now...Originally Posted by SNiiPE_DoGG
only 4 gb (2x2gb), although I used to run 4 sticks of dominator @ 455 FSB, needed to overvolt to run stable
yeas you need to set the GTLS for 1.35v vtt earlier in the thread. I run 97,94,77 at the moment but i am going to pursue a higher vtt and higher clocks in the coming days
see this chart:
602 is good ( i run 603 x38 version) I got the bios chip so I am going to try the 725 x48 bios in my x38 so I will let y'all know how that turns out
If anyone knows how to get the SATA hotswap (plug n play) working please let me know or my esata drive is worthless and I will have to manualy backup my system every week (yea right like that is ever going to happen!)
On another note my friend just bought a P5Q Delux and his video cards VDI (on the inside of the panel) hits some caps so he can't use the 16x slot WTF! I guess that board wont work for me either...
Reply With Quote
Bookmarks