Quote Originally Posted by OneRicardo View Post
Hi!

I have an Asus P5Q and i need help to overclock my Q6600 to 3 ghz!

My settings are:



My questions are:

- The AI Clock Twister option, what are the differences beetween, lighter, moderate, stronger, etc... ?

- I can boot at 900 mhz in my memories, but when i try to reach 1000 mhz i can't, i even put 2.2v in my memories but nothing... Is any setting bad in my config or is the ram that is not very good... Is strange because for 900 mhz i only put 1.9v.

- What are the PULL-INS and what are the differences when is enable or disabled.

- Options like Intel Virtualization Tech, Execute Disable Bit, and the others... why are always disabled for overclock ?

- Why in DRAM Frequency don't appear frequency's like 800,900,1000, and appears 7xx, 88x, 1002, etc ?? ( I know that varies depending of the FSB, but why i can't put 900 ? ). :S

And the last question

- Load Line Calibration must be enable or disable ? What are the differences ?

Thanks... I know this a lot of questions, but i want to put this only in 3ghz, and iam a bit noob on this, so if anyone help me, i will be grateful.

P.S- Sorry for my english...
AI Transaction Booster, try Auto or somehere near 10.
Dram Voltage, What ram are you running? Maybe try 1.98 to 2.0v for ram that runs 2.1v
Load Line Calibration, It fixes the vdrop/vdroop for the most part, I don't use it but alot of folks do.
I suggest running ram timings loose until you get your highest clock, then mess with tightening ram timings up. Hope this helps some.

Larry