Here are my settings Grnfinger.




Extreme Tweaker
Ai Overclock Tuner : Manual
OC From CPU Level Up : AUTO
CPU Ratio Control : Manual
- Ratio CMOS Setting : 8
FSB Frequency : 500
CPU Clock Skew : Normal
North Bridge Clock Skew : Normal
FSB Strap to North Bridge : 333
DRAM Frequency: DDR2 1002MHz
Dram Clock Skew CH1 A1 : A
DRAM Clock Skew CH1 A2 : A
Dram Clock Skew CH1 B1 : A
Dram Clock Skew CH1 B2 : A


DRAM Timing Control: Manual
CAS# Latency : 5
RAS# to CAS# Delay : 5
RAS# Precharge : 5
RAS# ActivateTime : 15
RAS# to RAS# Delay : 3
Row Refresh Cycle Time : a
Write Recovery Time : a
Read to Precharge Time : a

Read to Write Delay (S/D) : a
Write to Read Delay (S) : a
Write to Read Delay (D) : a
Read to Read Delay (S) : a
Read to Read Delay (D) : a
Write to Write Delay (S) : a
Write to Write Delay (D) : a

Write to PRE Delay : a
Read to PRE Delay : a
PRE to PRE Delay : a
ALL PRE to ACT Delay : a
ALL PRE to REF Delay : a

DRAM Static Read Control: Disabled
Dram Read Training : AUTO
MEM OC Charger : AUTO
Ai Clock Twister : Light
Transaction Booster : Auto


PCIE Frequency : 105

CPU Voltage : 1.40000
CPU PLL Voltage : 1.51325
FSBT : 1.40475
DRAM Voltage : 2.13
North Bridge Voltage : 1.56375
South Bridge Voltage 1.5 : 1.5
South Bridge Voltage 1.1 : 1.1

CPU GTL Reference 0 : +20mv
CPU GTL Reference 1 : +10mv
CPU GTL Reference 2 : +10mv
CPU GTL Reference 3 : +20mv
North Bridge GTL Reference : AUTO
DDR2 Channel A REF Voltage : AUTO
DDR2 Channel B REF Voltage : AUTO
North Bridge DDR Reference : AUTO

Load Line Calabration : Enabled
CPU Sread Spectrum : Disabled
PCIE Spread Spectrum : Disabled