"ASUS P5Q Deluxe discussion".

[Tulû]

You can set the multiplier in the AI Tweaker settings, but then you can also set it somewhere else - it's in the next section to the right in BIOS. Make sure that's not set on Auto... it's the same place where you can disable/enable Virtualization, C1E, etc etc etc.




Try playing with the GLT references for cores 1/3 and 0/2... Sometimes one of the four cores will be weaker than the others and require more voltage.

Multiplier is set to 8 , not auto .
I played with GTL Refs.
Now i have :

GTL 0/2 : 0.630
GTL 1/3 : 0.670
CPU PLL : 1.58
FSB Term. : 1.48
NB : 1.30 ( was 1.34, it seems that , i have to set it high again )
NB. GTL REF: AUTO

With these settings i get error in small FFTs in 8 minutes.
I'll set NB to 1.34 now.
Any other advices ?
By the way, is my Vcore enough for 425x8 ?

Edit:
With GTL REFs set to 0.630 and 0.670 got error in 1 minute.
Now set the GTL REFs to AUTO and increased Vcore by 0.00625 = 1.3750