very nice
/borat
very nice
/borat
- Silverstone FT-01B
- Corsair HX620
- DFI LanParty DK 790FX-M2RS
- AMD X2 6400+ BE w/ Thermalright Ultima 90 @ 3.2
- 2 x 1 GB G.Skill DDR800(4-4-4-12)
- 2 x 1 GB Corsair XMS2 Dominator(4-4-4-12)
- BFG Tech 9800GTX(stock cooling for now)
- 2 - 250GB Seagate SATA
OUTSTANDING! Small changes that make a huge difference! Plus the photo-quality makes a big difference to judge it. Keep it going!
Used the A.C.Ryan Pin Remover. The pins are pretty tight fit in there, but if you put the pin remover a little around and pullOriginally Posted by twwen2
Looking real good there Steffen. One question: What did you use to sleeve the ATX connectors on the HX520? lyl and i are both having a hard time getting the pins out of our HX620 connectors, they don't want to budge.
I'm using the Sunbeam PSU modding kit.
a bit harder on the cable (not to hard) they come out. A fight between cable and connector has begun
Last edited by Steffen; 06-30-2008 at 12:49 PM.
build looks great but one thing that i must point out.
the tubes finish are dull! im a victim of that myself
but what ive tried and works is polishing the tubes
not really hard and is pretty simple to do.
with masterkleer tubing, i give it a nice blast of heat
with my heat gun and it makes it much softer and
smoother. probably dangerous but, i really need to look
up the max temp for those tubes lol
i think you need some tygon.. it would really make the
build, the dull tubes are killing it!
Thanks for replying. It is most definately a fight. I've managed to get one pin out in 2hrs of swearing and cursingUsed the A.C.Ryan Pin Remover. The pins are pretty tight fit in there, but if you put the pin remover a little around and pull
a bit harder on the cable (not to hard) they come out. A fight between cable and connector has begun. Must be something more to it. I'll grab that AC Ryan tool, most ppl said they used that one.
looks great
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
build looks great but one thing that i must point out.
the tubes finish are dull! im a victim of that myself
but what ive tried and works is polishing the tubes
not really hard and is pretty simple to do.
with masterkleer tubing, i give it a nice blast of heat
with my heat gun and it makes it much softer and
smoother. probably dangerous but, i really need to look
up the max temp for those tubes lol
i think you need some tygon.. it would really make the
build, the dull tubes are killing it!
AWESOME ! Could only be better with the shiny tubes.^
I agree. As stunning as the build is (and stunning most definately is) the masterkleer prolly wasn't the best choice. But if you like it, that's all that mattersbuild looks great but one thing that i must point out.
the tubes finish are dull! im a victim of that myself
but what ive tried and works is polishing the tubes
not really hard and is pretty simple to do.
i think you need some tygon.. it would really make the
build, the dull tubes are killing it!
Oh my god, i finally bleeded the system completly. What a hell trip.
But i could had have it easier if knew the trick to do on this system ^^
Steffen, looks wonderful. It went together great!
Custom black murderbox
QX6700 Quad Core
eVGA Nforce 680I SLI A1
2x eVGA e-Geforce 8800 GTX SC
2GB Corsair 9136C5DF 1142 Mhz
PP&C 750 Watt Sli PSU
2x Raptor 150GB + 75GB
Ek Waterblocks (Gfx, CPU, Chipset, Resevoir)
MCP655 Pump / Variable Speed
Thermalchill PA120.3 & PA120.2
Custom Silverstone TJ-07 case
Well itīs not done yet but thanks for the charming comment
A few new pics. Still work in progress.
As you can see, on every picture the color of the coolant looks different. So i have to keep an eye on the light for the snapshots
I love it, black and green is the best combination.
How do you keep it clean and without dust ?
I would like to be on sysprofile but my german is bad, can we see someday sysprofile in english ??
Last edited by ultimeus; 07-02-2008 at 02:05 AM.
We will see
GreatWe will see
?? Are you working in a sterile room ?
Muahaha. My room is far away from sterile. As i said at some point in this thread i got two budgies in here.
So the dust is just horrible. Before i take pictures i dust it off. But it´s not so horrible in the case itself. Only on the top.
When the frontplate arrives the inside should be a lot cleaner.
Looks amazing Steffen - so clean!
I'm working on that faceplate Mate, hang in there!
I'm standing in front of my house to wait for the delivery, hang in there!
Yay, i hope it´s gonna be done soonLooks amazing Steffen - so clean!
I'm working on that faceplate Mate, hang in there!
Going to a lan party on the 10th july, but i think it´s not done until then. Or? ^^
BTW: You like it? Wow
CATCH THE PACKAGE!I'm standing in front of my house to wait for the delivery, hang in there!
incredible, great pics steffen
XS WCG Rules: #1: don't pull fart_plume's finger #2: Dave aka Movieman, don't give him your phone number if you like your hearing
XS WCG Note: There are 2 sets of points, WCG and Boinc. WCG = 7x Boinc
Project: Dark Matter (<- link) - Asus Maximus II Formula, Intel X3330 3.4ghz @1.32v under load, corsair ddr2 1066 8gigs, evga gtx260 core 216, pc p&c 750W, EK Supreme HF Nickel, iandh 175 res, Swiftech MCP355, Black Ice GTX G2 240, Lian Li v1200b
silverstone tj07 build log
the fact that the tubing isn't shiny doesn't bother me at all with this build. i actually think it looks pretty good with the somewhat cloudy tubing.
- Silverstone FT-01B
- Corsair HX620
- DFI LanParty DK 790FX-M2RS
- AMD X2 6400+ BE w/ Thermalright Ultima 90 @ 3.2
- 2 x 1 GB G.Skill DDR800(4-4-4-12)
- 2 x 1 GB Corsair XMS2 Dominator(4-4-4-12)
- BFG Tech 9800GTX(stock cooling for now)
- 2 - 250GB Seagate SATA
can't wait to see the frontplate!
Small update. Orderd myself a acetal top for the nickel ek cooler.
Should fit better with the acetal cpu cooler
Steffen: The Nickel Acetal Combo will be pure understatement. Lots of people will not recognize the "special", but that's what understatement is all about. Great idea!
looks great
small thing,
turn those cable ties behind the barb will cleaner ( the bit where you cut it ) face it behind the barb
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Posting Permissions
Reply With Quote
Bookmarks