"ASUS P5Q Deluxe discussion".

[2chesapeakes]

Quick question I installed the P5Q deluxe and everything booted. Now I am trying to 4.0Ghz 400FSB 10 Multi my QX9650 requires alot more voltage than the ones I am seeing here 1.4875. I can get the board to boot however after 25 ,imutes of Prime 95 blend or Small FFT's the computer freezes. I am using PL level 10. Is there something that would usually cause tthe system to freeze. I started getting rounding errors so I bumped up the voltage no more rounding errors just screen freeze. Some advice would be greatly appreciated.

CPU QX9650
OCZ PC9200
Windows Vista 64

CPU Ratio Setting: 10
FSB Strap to North Bridge: auto
FSB Frequency: 400
PCI-E Frequency: 101
DRAM Frequency: 1066

CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 15
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time: 55
Write Recovery Time: AUTO
Read to Precharge Time: AUTO

DRAM Static Read Control: DISABLED
DRAM Read Training: disabled
MEM. OC Charger: enabled
AI Clock Twister: moderate
AI Transaction Booster: manual 10

CPU Voltage: 1.40625v
CPU GTL Voltage Reference (0/2): .670
CPU GTL Voltage Reference (1/3): .670
CPU PLL Voltage: 1.54v
FSB Termination Voltage: 1.34v
DRAM Voltage: 2.1
NB Voltage: 1.26v
NB GTL Reference: AUTO
SBridge Voltage: AUTO
PCIE SATA Voltage: AUTO

Load Line Calibration:--enable
CPU Clock Skew : delay 400ps
NB Clock Skew : delay 100ps