Quote Originally Posted by Coupa View Post
Didnt work :\

But it certainly helped.

With -43, -48, -48, -43 for GTLrefs i lasted alot longer then i usually do in CoH:OF, and in CoD4 it did the stutter instead of freeze once, then it froze about 20 minutes later, but still...progress.

What now do you think i should change?
Once again, changes/additions in red color:

Code:
Required System Specifications
PSU ( Power Supply Unit ) = Silverstone Strider 850W
CPU = Intel Core 2 Quad Q9450
RAM = 4x1gb DDR3 1066 xms3 Corsair
HDD ( the one where you have your windows installation on ) = Samsung 500GB
VGA1 = Inno3d 9800GTX
VGA2 ( if you have ) = Inno3d 9800GTX
VGA3 ( if you have ) =
SPU ( Sound Card ) = Stock SupremeFX II
NorthBridge Cooling = place a fan above it ( even a small one ) to cool it down
SouthBridge Cooling = none
CPU Cooling = Zalman 9500
RAM Cooling = Thermaltake cyclo ram cooler
nFORCE Chipset Drivers Version = 9.64
ForceWare/GeForce Drivers Version = 175.16
Sound Card Drivers Version = 6.10.2.6320 (thats the device manager one, forgot its actual name...its the latest anyway).
BIOS version 0801 REQUIRED

BIOS Settings
Extreme Tweaker
CPU Level Up = Auto
Memory Level Up = Auto
AI Overclock Tuner = Manual
CPU Multiplier = 8
FSB - Memory Clock Mode = Unlinked
FSB - Memory Ratio = N/A
FSB (QDR) MHz = 1333
MEM (DDR) MHz = 1066
LDT Frequency = 4x
PCIE Bus Slot 1 & 2 MHz = 100
PCIE Bus Slot 3 MHz = 100
SPP<->MCP Ref Clock, MHz = 200.5MHz
SLI-Ready Memory = Disabled

Memory Timing Setting
P1 = Auto
P2 = Auto
tCL ( CAS Latency ) = 7
tRCD = 7
tRP = 7
tRAS = 24
Command Per Clock (CMD) = 2T
tRRD = Auto 7
tRC = 33
tWR = 12
tWTR = 25
tFAW = 33
tRD = 11
tRTP = 7
tRFC = 72
tREF = Auto 7.8uS

Over Voltage
CPU Voltage = 1.375V
Loadline Calibration = Enabled
CPU PLL Voltage = 1.60V
CPU VTT Voltage = 1.20V
Memory Voltage = 1.60V
NB Core Voltage = 1.58V
SB Core Voltage = 1.55V
CPU GTL REF0 Ratio = -29mV
CPU GTL REF1 Ratio = -32mV
CPU GTL REF2 Ratio = -32mV
CPU GTL REF3 Ratio = -29mV
NB GTL REF Ratio = +30mV
DDR3 CHA1 Ref Volt = Auto
DDR3 CHB1 Ref Volt = Auto
DDR3 CHA2 Ref Volt = Auto
DDR3 CHB2 Ref Volt = Auto

CPU Configuration
CPU Internal Thermal Control = Disabled
Limit CPUID MaxVal = Disabled
Enhanced C1 (C1E) = Disabled
Execute Disable Bit =
Virtualization Technology = Disabled
Enhanced Intel SpeedStep(tm) Tech. = Disabled
CPU Core 2 = Enabled
CPU Core 3 ( Ignore this setting, unless you have a Quad-Core CPU ) = Enabled
CPU Core 4 ( Ignore this setting, unless you have a Quad-Core CPU ) = Enabled

Spread Spectrum Control
CPU Spread Spectrum = Disabled
PCIE Spread Spectrum = Disabled
MCP PCIE Spread Spectrum = Disabled
SATA Spread Spectrum = Disabled
LDT Spread Spectrum = Disabled