Asus Striker II Extreme: Corruption/Freezes Troubleshooting Thread

[Coupa]

equired System Specifications
PSU ( Power Supply Unit ) = Silverstone Strider 850W
CPU = Intel Core 2 Quad Q9450
RAM = 4x1gb DDR3 1066 xms3 Corsair
HDD ( the one where you have your windows installation on ) = Samsung 500GB
VGA1 = Inno3d 9800GTX
VGA2 ( if you have ) = Inno3d 9800GTX
VGA3 ( if you have ) =
SPU ( Sound Card ) = Stock SupremeFX II
NorthBridge Cooling = none
SouthBridge Cooling = none
CPU Cooling = Zalman 9500
RAM Cooling = Thermaltake cyclo ram cooler
nFORCE Chipset Drivers Version = 9.64
ForceWare/GeForce Drivers Version = 175.16
Sound Card Drivers Version = 6.10.2.6320 (thats the device manager one, forgot its actual name...its the latest anyway).
BIOS version 0801 REQUIRED

BIOS Settings
Extreme Tweaker
CPU Level Up = Auto
Memory Level Up = Auto
AI Overclock Tuner = Manual
CPU Multiplier = 8
FSB - Memory Clock Mode = Linked
FSB - Memory Ratio = 3:2
FSB (QDR) MHz = 1600
MEM (DDR) MHz = 1066
LDT Frequency = 5x
PCIE Bus Slot 1 & 2 MHz = 100
PCIE Bus Slot 3 MHz = 100
SPP<->MCP Ref Clock, MHz = Auto
SLI-Ready Memory = Disabled

Memory Timing Setting
P1 = Auto
P2 = Auto
tCL ( CAS Latency ) = 7
tRCD = 7
tRP = 7
tRAS = 20
Command Per Clock (CMD) = 2T
tRRD = Auto 4
tRC = Auto 27
tWR = Auto 10
tWTR = Auto 14
tFAW = Auto 21
tRD = Auto 9
tRTP = Auto 4
tRFC = Auto 48
tREF = Auto 7.8uS

Over Voltage
CPU Voltage = 1.3
Loadline Calibration = Enabled
CPU PLL Voltage = Auto
CPU VTT Voltage = 1.3
Memory Voltage = 1.52
NB Core Voltage = 1.46
SB Core Voltage = 1.55
CPU GTL REF0 Ratio = -58
CPU GTL REF1 Ratio = -64
CPU GTL REF2 Ratio = -64
CPU GTL REF3 Ratio = -58
NB GTL REF Ratio = Auto
DDR3 CHA1 Ref Volt = Auto
DDR3 CHB1 Ref Volt = Auto
DDR3 CHA2 Ref Volt = Auto
DDR3 CHB2 Ref Volt = Auto

CPU Configuration
CPU Internal Thermal Control = Disabled
Limit CPUID MaxVal = Disabled
Enhanced C1 (C1E) = Disabled
Execute Disable Bit =
Virtualization Technology = Disabled
Enhanced Intel SpeedStep(tm) Tech. = Disabled
CPU Core 2 = Enabled
CPU Core 3 ( Ignore this setting, unless you have a Quad-Core CPU ) = Enabled
CPU Core 4 ( Ignore this setting, unless you have a Quad-Core CPU ) = Enabled

Spread Spectrum Control
CPU Spread Spectrum = Disabled
PCIE Spread Spectrum = Disabled
MCP PCIE Spread Spectrum = Disabled
SATA Spread Spectrum = Disabled
LDT Spread Spectrum = Disabled

Problem Description
Never ever had a corruption issue (touch wood), but i have never been able to use SLI without a freeze (in games, i can run vista as long as i like without freezing with SLI). The GTLrefs and voltages that i have there allow me to use one card with no freezing in games, but i still get freezes in movies, although it takes an hour or two. If i move those GTLrefs up or down, i dont get the freeze, but it will stutter when it would normally freeze for about, 1-2 seconds, then continue like nothing happened. With all settings Auto i get cant play games, as it freezes. Tried overclocking too, still no corruption but no improvement in SLI freeze, so ill just wait until ive solved SLI before i overclock.