Quote Originally Posted by ZoKi View Post
Could someone please recommend me some settings i shoud change/look at to get my chip stable at 3.6 plz. I can get my chip stable at 3.55 with 1.35 or so vcore 10hours+ prime just fine. Thinking it could be this motherboard I can boot up into windows with 3.6 but prime can only last for about 5-10min then freeze up.. Temps seem to be fine doesnt matter how high i put the vcore. always stays under 62C. Ive even tried to give cpu 1.435v but still freezes.




Thanks

Zoki, i think you have your voltages WAY too high, especially FSB voltage...you have it maxed out, in fact both FSB and (G)MCH are maximum...dangerous IMO. Try setting FSB to normal or +0.10V and set (G)MCH to +0.200V or +0.225V. (G)MCH seems to be the key for FSB stability.

Vcore, i get 3.4GHz on default 1.2375V....try notching it down more. You're issues may not be Vcore related but moreso FSB stability and feeding the NB enough voltage.