Innovation Cooling's Diamond 7 TIM test results

[littleowl]

Ok let me get started here. sorry This one is going to be a bit of a book!

Here is where I started with my E6600. As you can see my temps were about 29c at a room temp of 22c.

Today before i started I checked room temp and it was 15c and I had AS5 on the chip. We are 1 day short of 2 weeks. The cores were
core 0: 22
Core 1: 21

now I am doing pressure film on this chip.
I will post the film scans here in a little bit but here are a couple things I have done.



List of 3 tests done on the E6600 chip.
1st test
Room temp: 16.7c
This test was done with 6002 on water loop with My hold down design

2nd test
Room temp: 17c
This test done with fuzion no water connected with My hold down design.

3rd test
Room temp: 18c
This test is being done after I did a slit lap of the cpu edges
fuzion no water connection with My hold down design.


now I also did 2 pressure tests on a friends lapped Q6600.
I will post them also but I have no temps. they were very interesting to me! See what you think of them? the first one of his was with my 6002 and the 2nd one is with the fuzion and my hold down.