Could the people that have confirmed the voltage bug also tell us which revision of the board they have? I ask because the person that had 1.56v vpll when setting it to 1.5v in bios had the newer 1.02g revision board.
Could the people that have confirmed the voltage bug also tell us which revision of the board they have? I ask because the person that had 1.56v vpll when setting it to 1.5v in bios had the newer 1.02g revision board.
Originally Posted by munim
I have rev. 1.02g and my PLL was set in BIOS to 1.50v, however when tested
with a DMM the reading showed 1.86v, yes very shocking!
This is on BIOS 1013, and I dont know if this was occuring on other bios revisions.
I currently have it set to 1.60v in bios which gives me 1.66v when read with
my DMM, so at this point 1.66v is the lowest PLL voltage the board will
supply to my CPU.
Sandy Bridge 2500k @ 4.5ghz 1.28v | MSI p67a-gd65 B3 Mobo | Samsung ddr3 8gb |
Swiftech apogee drive II | Coolgate 120| GTX660ti w/heat killer gpu x| Seasonic x650 PSU
QX9650 @ 4ghz | P5K-E/WIFI-AP Mobo | Hyperx ddr2 1066 4gb | EVGA GTX560ti 448 core FTW @ 900mhz | OCZ 700w Modular PSU |
DD MC-TDX CPU block | DD Maze5 GPU block | Black Ice Xtreme II 240 Rad | Laing D5 Pump
Posting Permissions
Reply With Quote
Bookmarks