Quote Originally Posted by Hans Gruber View Post
Thanks for the feedback Gen & Khamo. I was able to bump my Vcore down from 1.45v to 1.4375v in the bios. With Vdroop CPU-Z shows 1.42v with drops downt to 1.38v. I think I have my northbridge set at 1.525v in my bios. I upped my VTT or FSB voltage to 1.425v. It passed Super Pi 32M and 3DMark06 without any problems. I do not waste much time with Prime95 (overkill)anymore. I think 32M of Pi is plenty stable.

Anybody have any limits on what the FSB voltage should top out at? My MSI board has slightly less elaborate heatpipe cooling than the Platinum P35 but I think the results are about equal minus a few extras like firewire and SPDIF.

Can the Q6600's with 1.2VID's go to 4Ghz on air?
1.5 volts seems a little high. I'm running at 3.6 Ghz with 1.37 v to my P35 NB. I haven't taken my Q6600 over 3.8 but even then I only needed 1.45.