Quote Originally Posted by Mr Alfabet View Post
i searched this thread, but couldn't find anything: does any1 else have troubles with overvolting of the cpu?
my bios VID is 1,34375, but cpu-z reads out 1.360V constantly with droop disabled. With droop enabled the Vcore drops to 1.344 under load.

edit 1:
tweaking the GTL or disabling droop didn't help my pc get stable at 8x510, so i'm now upping the Vnb to 1.65, if that doesn't work then i think i'll increase the "SBcore/CPU PLL", and as last i'll try the VTT (means more GTL tweaking :S)... sounds right?

edit 2:
VNB didn't do the trick: prime fails after 1m :S CPU PLL is up next..
I wouldn't up the PLL if I were you, sure it may make it stable but it will degrade the CPU's maximum fsb. I have wiped 50fsb of a CPU in an afternoon upping the PLL so be careful.

CN