Quote Originally Posted by C-N View Post
The board is supposed to switch of following BIOS changes then power on to set the NB strap etc then switch of again before finally poweer on, posting & booting into windows.

Constant boot cycles indicates a problem most likely with the overclock.

I have run this board with 4 drives in RAID 0 + 2GB OCZ SLI's @ 1200MHz, Laing D5, 3870x2, Q6600 @ 3.8GHz with the GX700 PSU & it all plays nice.

If you look back through this thread you will find my rig & all the settings I used, maybe they can help

CN

P.S I hated my P5K DLX from day 1

I think I have a bad board. Hell...I even receive one bad Sata cabel with this board. My matrix raid 0/5 array got corrupted when the board cannot connect to my third drive. I reconnect the cabel on my third drive and the drive still doesnt appear. Change the sata cabel and it all solved. Spend more than 15 hours rebuilding the array.

I know it normally off and then on after changing some values in BIOS. But mine would restart when start priming with high clock speed and then it OFF and ON rapidly more than 5 time before it start again normally.
This problem even start with a decent 3.4 Ghz with a slight bump on voltage.

I had a bunch of BIOS setting off copied in a notepad from nearly the whole thread. I have tried them all except some with high SB Core/CPU PLL Voltage. But the issues is still there.

I guees I doomed unless anybody can solved this prob. I wish I try this board on air before done with all the loop. It a nightmare redone all the 7/16 tube and 1/2 barb. This sucks......