E8500 6GHz Benchable Club

[hey]

Thank you always, xwards-san.


Thank you for your advice, hey-san.
I have heard giga p35 dq6 is good at high FSB.
And I have two anxious points.
One is the speed of Pi.
Another is Vcore mod.
Are they OK?

DEWA DEWA

firstly , best part of this mabo is that you can bench on the mhz limits of cpu, for example with 6600 i can have 5.4ghz cpuz validation but can bench wprime1024 and 3d @5.33ghz (5.25ghz on p5b dlx) ,and another experience of mine , with 6750 had 656*8 max validation(647*8 on commando) but it can bench 655*8 spi 1m and easily 3d at 650*8 with this mabo.
in case of voltages, never needed any vmod on that mabo, it can easily does enough fsb with the maxes on bios ,and no problem up to 1.95vcore but personally didnt try 2v and 2v+ since even 1.8-1.95 gave me nothing on 65nm c2d s.not tried with wolfy,i hope i can have time to try our 8500 on giga but these days i am to busy ..
well, in case of spi speed , it is a "little" slower than p5b but because it lets cpu more mhz and its ability to boots on your memories can give better results ,
here some examples of our sticks on giga p35 dq6







best regards ,,