Thank you m8!![]()
I used 1.70VMCH then.
Now I use 1.75-1.77V.
But the situation is not so improved.....![]()
I need much trial and time.![]()
Thank you for your helpful advice, eva2000-san!
I also think key is in GTL ref volts like DFI P35 mobo.![]()
I will search and try GTL mod for P5K.![]()
Then I have a bit improvement of pifast.
I used before-san's setting.![]()
Thank you so much for your advice, before-san!![]()
hexus_pifast : 16.03s @5853.9MHz (FSB616.2MHz x 9.5)
This is an illusion that exists in my mind.![]()
![]()
![]()
I discovered the p5b dlx in 2006, and you enlight it again in 2008 !! great job as always![]()
Yes, i think the problem can be the new bios for wolfyes on P5K series...in fact yesterday i tried to bench again with this new bios on my 665 fsb E6850 but surprise...i found the fsb wall around 610 Mhz like on 8500...this can suggest that somethings on new bios limit our clock. You know the best bios on p5k for exaple was 0414...with another bios i reached only 5500Mhz vs 5740Mhz reached using 0414 (E6850)...maybe the situation is similar.
I tried to play with pll but nothing happened...tried from 1.5 to 1.8.
It's blocked on fsb![]()
Do you think we can hope in a new p5k bios like old 0414?![]()
Good going fellas.
GTL Ref V is needed to stabilize higher FSB/Mem straps, to remain within the narrowed margins. More important with DDR3 FSB:RAM ratios.
ASUS is know traditionally to decrease NB performance and increase it's latencies to allow higher FSB. So when benching, keep this in mind.![]()
Thank you, misteroadster-san.![]()
I am glad to still take an active part P5B Deluxe.![]()
I think we can hope it.![]()
Even if it is useless, some good method will be found.![]()
![]()
Thank you for your opinion and advice, KTE-san.![]()
Actually there are some P5K and P35 mobo that can work by high FSB with Wolfdale.![]()
I want to know what difference are there from my P5K.....![]()
Insane FSB and CPU clock ..... im wordless..
::: Desktop's - Intel *** Intel 2
2 x Xeon E5-2687W *** Intel i7 3930k
EVGA SR-X *** Asus Rampage IV Extreme
96Gb (12x8Gb) G.Skill Trident X DDR3-2400MHz 10-12-12-2N *** 32Gb (8x4Gb) G.Skill Trident X DDR3-2666 10-12-12-2N
3 x Zotac GTX 680 4Gb + EK-FC680 GTX Acetal *** 3 x EVGA GeForce GTX780 + EK Titan XXL Edition waterblocks.
OCZ RevoDrive 3 x4 960Gb *** 4 x Samsung 840 Pro 512Gb
Avermedia LiveGamer HD capture card
Caselabs TX10-D
14 x 4 TB WD RE4 in RAID10+2Spare
4 x Corsair AX1200
::: Basement DataCenter :::
[*] Fibreoptic connection from operators core network
[*] Dell PowerConnect 2848 Ethernet Switch [*] Network Security Devices by Cisco
[*] Dell EqualLogic PS6500E 96Tb iSCSI SAN (40 2Tb Drives + 8 Spare Drives, Raid10+Spare Configuration, 40Tb fail safe storage)
[*] Additional SAN machines with FusionIO ioDrive Octal's (4 total Octals).
[*] 10 x Dual Xeon X5680, 12Gb DDR3, 2x100Gb Vertex 2 Pro Raid1 [*] 4 x Quad Xeon E7-4870, 96Gb DDR3, 2x100Gb Vertex 2 Pro Raid1
[*] Monster UPS unit incase power grid failure backed up by diesel powered generator.
- Asus Rampage Formula X48 / Foxconn Black Ops X48
- Q9450 & E8600
- 2 x 1gb cheap as #$^& memory
- Sapphire HD4870
- Antec Truepower Quattro 1000w.
Quantum-Force boards i own(ed): Mars / Blackops / Avenger?
Good update NewBeetle-san...
Watching your progress and 2d damage...
Keep pushing it.
nice update
Cant wait to read more about your progress Newbeetle-san
The trouble with doing something right the first time is that nobody appreciates how difficult it was
Amazing FSB This will be a very exclusive club !!
Last edited by diezel; 03-14-2008 at 11:23 AM.
Thank you, Oliver-san.![]()
Now I'm a 3D Bencher.![]()
Next week I'll be back the Pi world.![]()
Thank you , THC-san.![]()
I want to get good results of 8M and 32M next runs.![]()
Thank you so much, diezel-san.![]()
Hi, my friend KTE-san.![]()
I want also to hear your idea.
I will wait until you have time.![]()
DEWA DEWA
NewBeetle
next week i attempt to join te club (vcore modded commando E8500 ln2)
nice result
Thank you, Felipe-san.
Finally i got it.![]()
hexus_pifast WR : 15.86s @5928.4MHz (FSB624.0MHz x 9.5)
Setup
CPU:Core2 Duo E8500#2 Q745A703
M/B:ASUS P5B Deluxe WiFi Rev.1.04 #6 vmod / BIOS:1223
M/B Bed:V-TEC ARC Bed Rev.3.3
CPU cooling:MaxxNeo + LN2 / Temp:-155C
NB cooling:Tara-chan 1st + LN2 / Temp:-45C
SB cooling:stock
Mem:Team PC2-8500 C4 #2 1GB x2
VGA:MSI NX7900GTO 512MB PCI-EX
HDD:Maxtor 6Y080P0 (IDE)
PSU:SilverStone OP1200
OS:Windows Server 2003
CPU Multiplier:x9.5
FSB:550MHz @boot
CPU/Memory:1:1
PCIExpress:100MHz
PCI Clock:33.33Mhz
Vcore:1.952V(CPU-Z)
Vdimm:2.60V(Actual)
FSB Termination Voltage:AUTO
NBVcore:1.70V(Actual)
SBVcore:AUTO
ICH Chipset Voltage:AUTO
"JP Pmem Strap Tweaks" / Special Thanks, before-san
FED14030h => 06
FED14034h => 12
FED1403Eh => 04
FED1403Fh => 25
FED14040h => 08
DEWA DEWA
NewBeetle
Nice WR NewBeetle-san. The 965 chipset doesn't stop surprising me. I noticed you had you northbridge cooled to -45C. Did you notice a coldbug if you got too cold? How much did that help your FSB or stability?
Bookmarks