Phenom 9500 w/ MSI K9A2 Platinum

[dr_drache]

thanks for check on the ram,

The BSoD at that stage makes me think you installed OS on a different board and didn't format/install it new here?

that right after OOBE, then install drivers, and reboot.
first install gave me no AREO, and acted like old xp/98 as in, REQUIRED
a reboot to detect new hardware.
2nd time, worked fine, but was getting that BSOD, then i thought,
what the heck, and flashed 1.30, and running pretty good right now
(it's a bit slower than my crosshair mobo though)
which also, weird enough had no issues with OC other than the lack of voltage control (bios 0905beta if you care)

That's very low, the patch is still applied to 3 cores there.

how would i make sure all 3 are applyed with RW? (version .29) i'll do it manually again see if i can "Fix it"

What speeds were you at?

that's about as stock as it gets, ~2301 everything in bios on default.


EDIT : changed the 0xc0010015 from 0x0000018 to 0x0000010 in all 4 cores. same results. tryed with RED AOD and all 4 cores, same result. intrestingly enough, when i brought up AOD after the first change, it was set at "yellow". and then when i shut it off (black), and rechecked CrystalCPU, only core 1 was back at 18.