Quote Originally Posted by KTE View Post
Try BIOS P0H (BETA, but better than 1.3): http://www.box.net/shared/gsn4mgt6o4

Load defaults and then flash with parameters /p /b /n /c

Let me know if you get the same problem. It looks like memory to me.
Also check your PSU voltages on all rails at boot.

If you still get it, can you describe exactly what happens and at what stages?
M9K2 Plat.. 9600BE
I tryed this bios, and it causes a BSOD (nvidia driver) on boot :
I think it's nvd3dumx.dll
OS is x64 vista
i have flashed with 1.33/1.30, and no issues, but i cannot get over 208 HHT...
no biggie really, not trying to do what KTE does.

but I noticed that BIOS 1.13 was reccomended, but i DO have
OCZ PC2-8000 ReaperX HPC 4GB Dual Channel for my ram...
could I place them in slots 1&3 (i know 1&2 are needed for dual channel, i got it like that now) and place the memory as unganged and get the same performance? only ask this because i could add some XMS2 ram then... and not feel weird with differnt in slots (don't ask lawl)

eather way, i'm thinking i should get a bit higher than :
(with AOD on red, and RWeverthing patch applyed)


I don't want to start messing around with bios, till i know i have one worth messing with. bear with me, havn't overclocked sence pencil mod on the athlons!