Phenom 9500 w/ MSI K9A2 Platinum

[Suosaaski]

^Post your config screenshots and details please.
Also post your temperatures and powersupply.

Make sure you've flashed using the parameters I stated because these are BETA ( /p /b /n /c). The only way you could get that perf. using Phenom is if something was wrong.

-To check TLB errata patch, just download CrystalCPUID, Function>open MSR Editor>type MSR number: 0xc0010015 and press RDMSR.
-Read the EAX register, it should end in 10. If not post back what it shows.
-Then change core to 2/4, 3/4, 4/4 using the drop down in CCPUID upper right corner and for each one press RDMSR again and read the value (note it).

-Next, type 0xc0011023 in the MSR number box and hit RDMSR again for each core.
-Check EAX now ends with 20 and if not, post back what it does.

Bad news (BIOS P0J):
The first tests: First core ends 10, the rest 18
The second values: First core ends 20, the rest 22

So, that means that for P0J it is disabled for the first core only, too. Am I right?

PS. Need to re-check, seems AOD messes with it a bit, at least changing from "red" to green results in the first core reporting 18 and 22 too...

PPS. Slightly off topic (but still within the topic of the thread), I do like the fact that with P0J (don't remember how it was with P0H) I don't have to mess with P-States anymore, as there is simply the option for cpu multiplier... might try overclocking via bios now...

PPPS. Doesn't seem to do anything wether I set it to enabled or disabled ("AMD's TLB-fix") via BIOS, it reads 18 and 22 for every core, and with AOD at "red" only the first core reads 10 and 20. AOD at "green" or "yellow" reads 18 and 22 for all cores.