**Official e8400/e8500 Retail OC Thread

[Big Lar]

Nice!

I'm very interested in your bios settings, especially the following:

Voltage Setting Page
CPU VID Special Add.......................+ xxxmv
DRAM Voltage Control......................2.xxV
SB 1.05V Voltage..........................1.xxxV
SB Core/CPU PLL Voltage...................1.xxV
NB Core Voltage...........................1.xxV
CPU VTT Voltage...........................1.xxV
Clockgen Voltage Control..................3.45V

CPU GTL1/3 REF Volt.......................0.xxx
CPU GTL 0/2 REF Volt......................0.xxx
North Bridge GTL REF Volt ...............0.xxx

OK, first off my vid reported by Core Temp is 0.9875v so my Vid special add is +262mv which gives it MY voltage, seems the vid+ the add will be different with different vids.
DRAM volts are set at 2.075v
The rest of the volts are Stock, no changes, tho I am testing 61/61/61 on the GTL's but for all practical purposes, I run them at 67/67/67 which is bios defaults.
Hope that is what you requested

Larry